PDA

View Full Version : 1965gtodriveshaft

pontiacperson
10-18-2016, 05:23 PM
can you guys help again , and thank you . resto on 1965 gto driveshaft painted . now do i stripe it and if so how and what colors and where ? thank you for any help you can
mockingbird812
10-18-2016, 05:43 PM
Pontiac forum might be best, but they will need to know which engine option and transmission that your car has. Also which factory it was built at - different practices from factory to factory. We have a few Goat guys so they may chime in.... Good luck!
pontiacperson
10-20-2016, 12:25 AM
thank you
pontiacperson
10-20-2016, 12:27 AM
thank you
pontiacperson
10-20-2016, 12:32 AM
the car is 1965 gto with 4spd m20 trans and posi 331 ratio rear . thank you guys again
njsteve
10-20-2016, 10:46 AM
PY would be the palce the ask: http://forums.maxperformanceinc.com/forums/forumdisplay.php?f=429
Tracker1
10-20-2016, 10:31 PM
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pontiacperson</div><div class="ubbcode-body">the car is 1965 gto with 4spd m20 trans and posi 331 ratio rear . thank you guys again </div></div>

white stripe, then red stripe

this guy has the position right, but the colors in the wrong order

http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-3497-50802-dvsftsm.jpg