Concourse restored Hardware sets
4 Attachment(s)
Many many sets of restored original assembly line Concourse Hardware 4 Camaros Chevelles Nova's Impalas GTOs Corvettes. Just going to list a few I have way too many to list and take pictures of. So if you don't see something you want just send me a message.
First up is an extremely hard to find set of big block intake manifold bolts they are recessed head with a built-in flange and a head marking. They don't reproduce these these were removed from a 69. $250 4 a set of 14. If you want the additional two engine lift bracket bolts for the front bracket and the rear lift bracket bolt it will be an additional $40. All excellent restored ready to install. Prices include shipping to the lower 48 if paid with PayPal friends and family. |
2 Attachment(s)
Next up a set of ewf head marking bellhousing to engine block mounting bolts. Again extremely rare and not reproduced. Excellent condition replated ready to install $90 shipt to the lower 48 if paid with friends and family PayPal
|
2 Attachment(s)
Set of 14 TR head marking valve cover bolts. Replated excellent condition ready to install $250.
|
3 Attachment(s)
69 Factory Hurst shifter mounting hardware for big and small block. Two sets excellent restored condition. $100 asset shipped to the lower 48.
|
2 Attachment(s)
69 through 72 big block alternator mounting hardware 4 log style water pump. $80 ship to the lower 48
|
2 Attachment(s)
One pair of horn bolts with serrated washers. $40 shipped to the lower 48
|
2 Attachment(s)
660 thermostat housing bolts $40 ship to the lower 48
|
3 Attachment(s)
65-72 corvette body mount hardware.
4 RSC body mount bolts 2 RBW radiator support Mount bolts 4 W stamps oversized thick body mount washers 2 special size radiator support Mount washers 6 heavy duty Square side lock washers 200.00 for the set shipped to the lower 48 |
The bolt set in pic #9 in your ad is for a small block and will work on a big block but to be correct all 3 bolts that mount the plate to the tail housing on a big block are hex head. Just trying to help. Thanks
|
2 Attachment(s)
Transmission to bellhousing mounting bolts a head marking stripped and replated excellent condition. They don't reproduce these. $80 ship to the lower 48 if paid with PayPal friends and family.
|
All times are GMT. The time now is 03:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.