[NorCam]

Thanks again for the info and such from your Nova build.

Plans are always changing with me and likely due to having a few fresh engines here to choose from. As of now the plan will be to mount the Crossram on the solid roller 355 motor that was just broken in from my 68. It's sitting with 10.5 compression and runs a 254/262 duration solid roller at .582 lift. It'll make some decent power with the 200cc aluminum heads that are mounted up and will flow nicely with the Crossram intake. Here's the Crossram after Mike went through both the carbs and freshened them both over the last couple days. These are NOS 70/71 service date 585 CFM carbs and should work real well on this motor. It'll soon go into the 69 car with an M22 and the 4:10 gearing. More on this over the next couple months as I'll have to juggle a few things around first. The CE 302 will sit off to the side with the original heads, intake and carb mounted up.