|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Smog pump alignment
Has anyone had a problem with the smog
Pump not lining up with the alt. , crank, Pulleys. The smog pump pulley seems to be 1/4” forward of the other pulleys. It’s a remanufactured pump, and aftermarket Pulley, brackets, ect. This is on my 69 COPO, Chevelle, original Drive train. Any help would be greatly appreciated. Thanks , Dave Last edited by paint4metal; 05-21-2024 at 05:50 PM. Reason: Pics |
#2
|
|||
|
|||
Update
So I took my smog pump bracket off,
And matched up the off set to a new One I just bought. There’s approximately 3/16 difference, The new one aligning the pump, 3/16 towards the block, witch is The direction it needs to go. I will mount the pump with the new Bracket tomorrow, give u all another Update. Dave |
#3
|
|||
|
|||
"aftermarket
Pulley, brackets" Not much from the aftermarket is an exact match. Don't know why they can't get things like this correct.
__________________
Don't believe everything you read on the internet ... Ben Franklin |
The Following User Says Thank You to Lynn For This Useful Post: | ||
paint4metal (05-23-2024) |
#4
|
|||
|
|||
Good info Dave! Thanks for sharing.
|
The Following User Says Thank You to Salvatore For This Useful Post: | ||
paint4metal (Yesterday) |
|
|