Ryan Weaver's 1969 Olds Cutlass S W31 Club Coupe

[Ryan1969Chevelle]

Looks good!!

Thinking about it...

Ryan

[Postsedan]

Now....here is a REAL CAR GUY...love the bolt through binder [img]<<GRAEMLIN_URL>>/beers.gif[/img]

Dan

[67 442]

If I had a good binder that big it would be in there. I have several parts books from 66 thru 69 and a newer one that covers 70 on up to 76.
This would cover the early part of the year and has illustrations also (bonus).

[72LS5]

Amazing find Ryan. Not quite the 69' Chevelle you were after, but equally as cool IMO. [img]<<GRAEMLIN_URL>>/beers.gif[/img]

[Ryan1969Chevelle]

High praise!!!!

Thanks for the kind words.

Ryan

[Ryan1969Chevelle]

I wanted to share my POP Warranty Protect-O-Plate dealer information in case anyone is researching a car sold at the same dealer.

85620
County Garage (AYR) LTD.
Northumberland Street
Ayr, Ontario

[Ryan1969Chevelle]

I assume this breaks out as:

Zone #85
Dealer #620

Ryan

[Ryan1969Chevelle]

Sent a note to the Ayr paper to try to get some pictures of the dealer back in the day:-)

Ryan

[Ryan1969Chevelle]

I was able to get into the glove box finally. Struck out, no jackpot in there:-)

I will fix the lock and put it back together.

My GM of Canada docs say I can call any GM dealer to get a new set of keys from the original key codes. I will do that mostly to get the recipt and see if the codes are on it....

I read the BOS a little more careful last night and the key codes are written on it:-) There is also and engine number...need to see if that number is the same as the oil fill tube number?

Ryan

[Ryan1969Chevelle]

Silly question does the glove box button/lock turn to lock or unlock and the depress to open?

I got it open by reaching in and unscrewing the latch bolts:-) I have cleaned the lock but it is very seized up, I have it soaking in JB 80 ( none on the plastic as I don't think that would be a good idea)

Also how does one remove the lock cylinder from the glove box door?

Ryan