#1
|
||||
|
||||
Oil Dipstick
Trying to determine which oil dipstick would be functional with this oil pan. Assuming it is a relatively stock pan installed on a later '70's 454 block with 427 internals, and installed in a '69 Nova. I have a repro yellow tip stick / tube that aligns nicely with an exhaust manifold bolt, however it is extremely loose going into the pan receptacle.
Any thoughts before I wrap the end with electrical tape and wedge it in there? Need to finalize a bunch of things on this project so we can fire it up....
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
#2
|
||||
|
||||
I'll even take a generic part at this point, anything to keep oil from coming up through!
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
#3
|
||||
|
||||
I've used an O-ring before for a seal between the dipstick and pan.
__________________
Robert _______________ 1969 Chevelle SS396 L78 M21 4.10 2023 Stingray Coupe Z51 |
The Following User Says Thank You to tunes For This Useful Post: | ||
YENKO DEUCE REGISTRY (03-19-2018) |
#4
|
|||
|
|||
X2
__________________
You've never lived until you've almost died -- for those who fight for it, life has a flavor the protected will never know! |
The Following User Says Thank You to earntaz For This Useful Post: | ||
YENKO DEUCE REGISTRY (03-19-2018) |
|
|