|
|
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
11-23-2011, 02:21 PM
|
||||
|
||||
"Plain" GM 15X8 steel wheels?
Does anyone know of a source for plain (i.e. non-rally and non-"smoothie"
 15X8 GM steel wheels with a 4.75"-5" backspacing? The closest thing I've found is by Wheel Vintiques but the appropriate size/backspacing is only available in various Rally forms. [img]<<GRAEMLIN_URL>>/dunno.gif[/img] If this fails, any recommendations where to go for widening and altering an OEM rim to spec? 
|
|
#2
11-23-2011, 02:44 PM
|
||||
|
||||
|
Re: "Plain" GM 15X8 steel wheels?
Eric...try contacting Stockton Wheel Service in sunny CA..they can build/modify whatever you need. They made the custom steel wheels for our 68 yellow bb car...
http://www.stocktonwheel.com/ Good luck..wilma
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro
|
|
#3
11-23-2011, 03:21 PM
|
|||
|
|||
|
Re: "Plain" GM 15X8 steel wheels?
Anybody can modify a 'regular' wheel. Take the center from a 15x 6 or 7...drill out the factory spotwelds. Take either a 15x8 rally or truck wheel [six lug and usually cheaper] and do the same..
take the center from the narrow wheel and weld it into the wider rim. True it up first on a spin balancer I've done it a couple times...any body shop or mechanic can pull it off if you don't want do. $150 labor seems like enough.
|
|
|
|
Linear Mode
