#1
|
||||
|
||||
L78 Nova Rad Help
Installing a 68 Camaro BB 4 core rad into my 70 Nova. Bolts in OK but just want to check if it is supposed to be set back from the cradle this much ?? 3/8" gap from tank edges to cradle and only 1-3/4" between pump pulley and rad.
I can Squeek in a flex fan using a 1/2" spacer (required to clear the alternator and lower pulley) but it is TOIGHT LIKE A TOIGER ?? Am I missing something ? Pics to follow.., Thanks for any input Gary
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22 |
The Following User Says Thank You to L78_Nova For This Useful Post: | ||
mprice (09-04-2018) |
#2
|
||||
|
||||
Re: L78 Nova Rad Help
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22 |
#3
|
||||
|
||||
Re: L78 Nova Rad Help
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22 |
#4
|
||||
|
||||
Re: L78 Nova Rad Help
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22 |
#5
|
||||
|
||||
Re: L78 Nova Rad Help
The rad was original from an ss396 68 Camaro but may have been recored. It was missing the tabs for the lower shroud hooks. I fabbed some up to mount the shroud.
Gary
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22 |
#6
|
||||
|
||||
Re: L78 Nova Rad Help
The gap between the radiator and core support looks a little wide, I'll take a pic of mine and post tomorrow night,originally a 396 nova had no spacer between fan and water pump pulley
__________________
1967 SS427 4 speed triple black survivor-sold to a good home 1969 nova SS396 L78 4 speed triple black survivor 1970 camaro SS350 citrus green,Dad bought it new! 1968 chevelle ss396 L34 M21 KK rear all born with 1972 formula 400 M22 |
#7
|
||||
|
||||
Re: L78 Nova Rad Help
I believe originally it would use a clutch fan ?? correct ??
I don't think a clutch fan would fit in the 1-3/4" gap. Are the original Nova rads only 3-core? Thanks for your help. Gary
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22 |
#8
|
|||
|
|||
Re: L78 Nova Rad Help
Big block Novas used a 3 core radiator. No clutch fan and no spacer. Stock fan was a 5 blade type, bolted directly to pump pulley. Even with a 3 core, it's close to the fan... A 4 core will work. Some guys do have 4 cores on there BB Novas.
|
#9
|
||||
|
||||
Re: L78 Nova Rad Help
What is the correct Fan PN I should be looking for ?
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22 |
#10
|
|||
|
|||
Re: L78 Nova Rad Help
3939001 is the PN!! The Parts Place Inc. carries a nice repop of this fan. Give them a call at 630-365-1800. Try a 1-800 first. Original fans if you can find one, go for big money. The repop fans will run you about $239.00.
|
Thread Tools | |
Display Modes | |
|
|