Body bolts?

[Schonyenko2]

Does anyone make the long tapered ftr frame, to body bolt for novas? Camaros are 4 the same. Novas have two short in the back, and two longer (appx 3/4 in) for the ft.
I had a stash but it is getting depleated. I have a place that I believe can make them, but if there's a source, I rather go that way. Any help would be appreciated.

[mockingbird812]

Does this mean no jumping railroad tracks at high speed with the Roof Deuce? http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif

[1969grb]

Ken, I think Mike got new bolts for my car from McMaster-Carr. He my chime in soon. Grady

[ORIGLS6]

"Does this mean no jumping railroad tracks at high speed with the Roof Deuce?"

Only if you paint it orange and put "01" on the doors.

Come to think of it, that car currently resides in 'Daisy Dooks' neck of the woods. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

[Schonyenko2]

The ones that came out of that car were about as good as they ever get. They got replatted, and put back in. I will need them down the road for other Novas and thought I'd check around now before I actually need them. Good used ones are getting pretty slim.
Yes, Mr Cumby. We do have our very own Daisy Dooks. They even have a shower dance facility if you're feeling a little dirty. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif (Only what I've been told)

[SS427]

Ken, I will check our stash tonight and let you know. Likely don't have a lot but I am sure anything will help.

[m22mike]

Ken I will get back with you about the bolts.

Mike

OK I am back.
Right or wrong this is what I used, not 100 % correct but what the heck I am just a hack http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif

http://www.mcmaster.com/#92316a806/=qe0my

Mike

[budnate]

Hey Mayor, Allen must have a bunch from all the nova's he parted. http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif.

[CamarosRus]

Has anybody checked www.amkproducts.com (http://www.amkproducts.com) for this application..........

Just a suggestion!

[WILMASBOYL78]

Are these the ones you are talking about..?? Just blasted them yesterday for the 69 granny car...

wilma

http://www.yenko.net/attachments/389587-tn_IMG_0474.jpg

[WILMASBOYL78]

another..

http://www.yenko.net/attachments/389588-tn_IMG_0475.jpg

[Kim_Howie]

Those are the front ones . I do know the what your talking about. sent me a link .

[Schonyenko2]

No. Those are for the frame to rad support. The ones I'm looking for are where the frame mts to the firewall. Novas have a washer/spacer between the frame, and body. Camaros don't. All 4 body mt bolts on a camaro are the same while the frt 2(middle if you count the rad support) on a nova are longer to compensate for the washer/spacer. Nova fenders don't line up very well without the washer/spacer. Mr. Clary can tell you all about that.

I havn't given Allen a shout yet. I was kinda hoping that someone was producing them. Good old ones are getting hard to find. IA. cars usually rust to about half the diameter of the bolt where the rubber cusion is. Not good.

[SS427]

I left you a message on your home phone last night. http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

[Bob]

After buying three sets of "correct" new bolts, I ended up cleaning my old ones as best I could and used them.