Vintage electric fuel pump

[1969grb]

I am looking for an electric fuel pump like the one pictured. Not sure of the manufacturer. I think these were used in the late 60's and into the 70's. http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif
Any help is appreciated.

Thank you, Grady

http://i304.photobucket.com/albums/nn180/1969grb/scan0001-3.jpg

[Born30YrsLate]

oooh Grady...the rare Dupree/Walbro dual electric fuel pump...the Motion guys know what a pain in the butt\expensive these are to find...

[PxTx]

Related thread from just a few months back. DIY type deal, but to find a set of duplex dupree pumps is quite challenging! I have an add which showed them in simplex, duplex and triplex configurations! I've seen hundreds of simplex ones, three duplex ones actually in the flesh and never seen a triplex in person.

http://www.yenko.net/ubbthreads/showflat...true#Post418790 (http://www.yenko.net/ubbthreads/showflat.php?Cat=0&Board=UBB6&Number=418790&Search page=1&Main=418745&Words=+pxtx&topic=&Search=true# Post418790)

[1969grb]

Thanks for the info guys, still looking.

Grady http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[ron67]

Grady,

Sounds like you may be building a "Day 2" vehicle?
Good luck on the search, i will keep my eyes open!

Ron

[1969grb]

I guess you could say that. It is already built! I would appreciate any help. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

http://i304.photobucket.com/albums/nn180/1969grb/67Camaro020.jpg

Grady
http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[Salvatore]

Car looks a little to fast for you Burchy! http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[m22mike]

[ QUOTE ]
Car looks a little to fast for you Burchy! http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[/ QUOTE ]

You are Jealous... http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

In the spring of 10 ...... http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[Salvatore]

http://www.yenko.net/ubbthreads/images/graemlins/drool.gif http://www.yenko.net/ubbthreads/images/graemlins/Can-I-Have-It.gif

[JRSully]

looks animal, max rubber on that rod

[Hawkeye]

Any chance we can get some more pics of the Camaro?
Thanks.

[napa68]

I agree. I'd love more pics. This is right up my alley http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

[1969grb]

This is where the pump I am looking for belongs!! http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

http://i304.photobucket.com/albums/nn180/1969grb/MiscShots046.jpg

A couple more photo's

http://i304.photobucket.com/albums/nn180/1969grb/67Camaro003.jpg

http://i304.photobucket.com/albums/nn180/1969grb/67Camaro004.jpg

http://i304.photobucket.com/albums/nn180/1969grb/67Camaro011.jpg

http://i304.photobucket.com/albums/nn180/1969grb/67Camaro019.jpg

http://i304.photobucket.com/albums/nn180/1969grb/67Camaro025.jpg

http://i304.photobucket.com/albums/nn180/1969grb/67Camaro034.jpg

http://i304.photobucket.com/albums/nn180/1969grb/67Camaro048.jpg

[mockingbird812]

C http://www.yenko.net/ubbthreads/images/graemlins/cool.gif http://www.yenko.net/ubbthreads/images/graemlins/cool.gifL! http://www.yenko.net/ubbthreads/images/graemlins/drool.gif

Beautimus Grady. She looks fast just sittin' still http://www.yenko.net/ubbthreads/images/graemlins/shocked.gif !!!!!!!!

Are those Remingtons on the front? A good friend's Dad in Greensburg, PA sold those. Had the huge Paul Bunyon standing outside the shop. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[1969grb]

Sam, Yes those are Remingtons on the front. I can not wait for spring here. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif


Grady http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[Ngtflyr]

You nailed the day two look, that car looks dead-on like the ones I used to oogle when I was in grade school. Across the street there was a gas station and several of the guys who worked there had 1st gen Camaros much like yours

[napa68]

I think I can hear Cream on the radio. Killer ride http://www.yenko.net/ubbthreads/images/graemlins/worship.gif

[Hawkeye]

Very nice looking ride. What kind of day-2 goodies you got under the hood? It's got a great stance. Thanks for sharing.

[JoeG]

Grady......I sent you an e-mail....

[1969grb]

http://i304.photobucket.com/albums/nn180/1969grb/MiscShots032.jpg

http://i304.photobucket.com/albums/nn180/1969grb/MiscShots036.jpg

[Hawkeye]

Now I like it even more. Sweet ride.

[Salvatore]

I LOVE it! http://www.yenko.net/ubbthreads/images/graemlins/worship.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[Atuckman]

there is a single pump on ebay. claims to be NOS...

[PxTx]

I'm skeptical of that one.

Does anyone know of any OE applications of these pumps? I beleive Packard and Duesenberg may have used the Autopulse version of these pumps in duplex or triplex configuration. Anyone know for sure?

[JoeG]

That pump has never been used...I've had it for a long time........just some info......Joe http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[PxTx]

I'm not sure Grady could have found a dirtier picture for refernce, but the duplex fuel pumps are the ticket. I don;t think just one of these would supply enough fuel for an 11 second ET.

As I mentioned before, there are some older Autopulse pumps which I beleive share some common parts. This manifold for example for a duplex pump confuguration.

http://forums.pelicanparts.com/uploads16/DSC022011256907144.jpg

The brackets seen in Grady's pic appear to be reproduced or available.

http://i304.photobucket.com/albums/nn180/1969grb/MiscShots046.jpg


http://images.google.com/imgres?imgurl=h..._US356%26um%3D1 (http://images.google.com/imgres?imgurl=http://www.classicandexotic.com/catalog/autopulse/images/thumbs/misc0127.jpg&imgrefurl=http://www.classicandexotic.com/catalog/autopulse/components.htm&usg=__BrgftdrUFDekfu1h4e8-cR1orCA=&h=165&w=200&sz=9&hl=en&start=6&um=1&tbnid =8olzEyDDnxk_QM:&tbnh=86&tbnw=104&prev=/images%3Fq%3Dautopulse%2Bfuel%2Bpumps%26hl%3Den%26 rlz%3D1T4TSNA_en___US356%26um%3D1)

Hey JoeG sorry to cast some doubt on your item. I've had some unused 801's too but I've never had a duplex configuration apart to know if they are correct for them or not. I have to admitt, the in and out fittings look much smaller than those in the duplex/triplex pumps. Thoughts?

[1969grb]

I think I have found what I need, even with a bad picture. I will let you know. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

http://i304.photobucket.com/albums/nn180/1969grb/dupree053jpg7.jpg

Grady http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[1969grb]

Paul, My computer and picture skills may be lacking, but they get the job done! http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

Grady http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[PxTx]

http://www.yenko.net/ubbthreads/images/graemlins/cool.gif That's really cool Grady. I'll agree anyone who has hs these pumps still around (especialy in that shape!) will be able to tell what you need from the pic you posted. Both the car and those pumps are a great find, enjoy!

[PxTx]

Maybe it's late and I'm not getting it, but notice how the 6v Autopulases seem to be run in parallel and those Dupree seem to be opposite?

Any comment on that? Maybe the motor is just clocked 180 so the housing mounts up like that.

[Born30YrsLate]

[ QUOTE ]
I think I have found what I need, even with a bad picture. I will let you know. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

http://i304.photobucket.com/albums/nn180/1969grb/dupree053jpg7.jpg

Grady http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[/ QUOTE ]

Will need to be 12V as they came in both 6V and 12V (have examples of both)...not sure if/how you can convert to 12V if you have 6V.

[1969grb]

I am aware of both 6v & 12v being available.

Thanks, http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[JoeG]

As with any manifold that has several smaller feeds the manifold and openings are larger to take the extra flow.....

[1969grb]

I would like to thank Joe G, and the SYC. I now have the pumps that belong in this car. I now have to decide how I want to run the fuel lines.

http://i304.photobucket.com/albums/nn180/1969grb/Fuelpump011.jpg

http://i304.photobucket.com/albums/nn180/1969grb/Fuelpump010.jpg

Thanks to everyone who helped in this. http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

Grady http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[Salvatore]

You are the man Grady! http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[WILMASBOYL78]

Grady, now all you need to do is fill the trunk with Tastykakes....the added weight will help off the line. Sammy can handle this job... http://www.yenko.net/ubbthreads/images/graemlins/beers.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[m22mike]

Why not just put Sammy back there... http://www.yenko.net/ubbthreads/images/graemlins/grin.gif....he most likely has some Kakes on board... http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[WILMASBOYL78]

Mike, that was my first thought....I was trying to be nice http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif

[Geoff Padgett]

Hello All
You know i have one of those Dupree type of pumps, it is not a dupree but looks identical, in either case it is in extremely nice shape and the plating is very nice , almost looks NOS, i will get a photo and find out the brand name. I would like to sell it if anyone is interested, i would take $75. plus shipping.I will upload some shots latter in the week. Thanks, Geoff.

[1969grb]

Geoff, pm sent

Grady

[PxTx]

WOW! Even if it is alreayd sold, I owuld like to see pics

[mockingbird812]

Horder!!!! http://www.yenko.net/ubbthreads/images/graemlins/no.gif






http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[1969grb]

Me http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

Grady http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[mockingbird812]

Ya YOU!!!!!!!!!!!!!!!!!!!!!!! http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gif

[mockingbird812]

Let this be a lesson to all of us out there http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif(except Grady http://www.yenko.net/ubbthreads/images/graemlins/smirk.gif) that "1969grb" has an 11 minute lag before he acts! http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

I wonder what he was doing during that time? http://www.yenko.net/ubbthreads/images/graemlins/hmmm.gif