Look what we got :)!!!

[Xplantdad]

We went to Apache Junction last night and picked up a 454 for my nephew Taylor's Chevelle...complete from carb to pan

It's a 3999289 block with a casting date of F1173. The heads are 353049's with a casting date of D1773...

The block has a stamp of 0702TRK (I think) that decodes to a 1973 240 HP engine that was in a chevy truck (in this case a 4x4) and was mated to a Turbo 400...

From what the guys on Team Chevelle said...this is a great foundation for a good 454. Low compression that will run on pump gas...great heads...and a high nickel block (whatever that means...LOL)


This engine is totally complete...and had compression in the cylinders of 135-140 across all eight.


This should be fun...here are a few pics

http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0006.jpg (http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0006.jpg)

http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0011.jpg (http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0011.jpg)

Taylor helping out!

http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0014.jpg (http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0014.jpg)

http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0022.jpg (http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0022.jpg)

http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0024.jpg (http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0024.jpg)

http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0025.jpg (http://i19.photobucket.com/albums/b156/lotsayenkopics/aaaa%20Tays%20engine/tn_DSCF0025.jpg)

[YenkoYS-199Stinger]

Nice score Bruce !!

[MosportGreen66]

Keep us updated with the build!

[ORIGLS6]

Cool! We'll be wantin' a weekly photo update now. http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[mockingbird812]

That'll be real nice. Cool find! Congrats Taylor - nothin' like a BB in '70 'velle! http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[1969l78]

Great find

[markjohnson]

Bruce, that's a great foundation for a VERY strong street engine. Those '73-'74 454's have excellent potential with their #781 or #049 oval-port cylinder heads and are one of my favorite foundations for a great engine. Have a reputable shop put the larger 2.19/1.88 valves in the heads, punch the cylinders out .060 for a big 468 CID, keep the cast crank and 3/8 rods with ARP bolts, slide in a Comp Cams 288 Street Roller with a Performer RPM dual plane intake and 850 Holley and this thing will run 11.40's all day long in a decently prepared car. This a great combination that has been copied MANY times over because of it's brutal effectiveness. John Lingenfelter and I came up with this great combination while out on my pontoon boat a long time ago and it just flat out works. He was absolute genius in the pursuit of power.

[Salvatore]

Good deal. I think perfect for what you guys want to do. Good torque and pump gas! http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[WILMASBOYL78]

Nice rat...you will pull some stumps with that engine when you're done!!

wilma http://www.yenko.net/ubbthreads/images/graemlins/beers.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[x Baldwin Motion]

[ QUOTE ]
Nice score Bruce !!

[/ QUOTE ]

yeah, I'll say!!! can I ask what something like that goes for in your neck of the woods? http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Xplantdad]

It was $500...I don't know if that's a good deal or not... http://www.yenko.net/ubbthreads/images/graemlins/confused.gif http://www.yenko.net/ubbthreads/images/graemlins/hmmm.gif http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

[Xplantdad]

[ QUOTE ]
Bruce, that's a great foundation for a VERY strong street engine. Those '73-'74 454's have excellent potential with their #781 or #049 oval-port cylinder heads and are one of my favorite foundations for a great engine. Have a reputable shop put the larger 2.19/1.88 valves in the heads, punch the cylinders out .060 for a big 468 CID, keep the cast crank and 3/8 rods with ARP bolts, slide in a Comp Cams 288 Street Roller with a Performer RPM dual plane intake and 850 Holley and this thing will run 11.40's all day long in a decently prepared car. This a great combination that has been copied MANY times over because of it's brutal effectiveness. John Lingenfelter and I came up with this great combination while out on my pontoon boat a long time ago and it just flat out works. He was absolute genius in the pursuit of power.

[/ QUOTE ]

Mark, cool info. I appreciate you sharing http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

The engine is going into my 16 year old nephew's Chevelle. I think we're going to keep it on the mild side for now...maybe just add a slightly better than stock cam http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

Pump gas...not too crazy, ya know? http://www.yenko.net/ubbthreads/images/graemlins/headbang.gif

[markinnaples]

What's the Chevelle like that it's going into?

Sounds like a score to me.

[Xplantdad]

[ QUOTE ]
Cool! We'll be wantin' a weekly photo update now. http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[/ QUOTE ]

I don't know that we'll be starting right away...but I will update when we do http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[4onthefloor]

http://i852.photobucket.com/albums/ab89/4onthefloor/BBCswap004.jpg (http://s852.photobucket.com/albums/ab89/4onthefloor/?action=view&current=BBCswap004.jpg) I scored this "Factory replacement" motor that was changed by the Chevy Dealer ..Back in the days.. it was in a 1973 Montecarlo & the motor had REALLY low miles , The original owner put a Hei on it.. everything else was NEW..even the Qjet... All i did was put a Nice Dual plane intake -Small primary Hedman hedders-Factory point ignition& a holley 800 And its all hooked up to a 4 speed with 4:10 gears, This thing is a TORQUE monster ,Lots of fun for what it is& im still running the factory Cam in it..Also its got the 781 heads & "high" nickel block... So you GOT a Nice engine For a Decent price http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Xplantdad]

[ QUOTE ]
What's the Chevelle like that it's going into?

Sounds like a score to me.

[/ QUOTE ]

It's going into the Chevelle on the left...

http://img.photobucket.com/albums/v645/xplantdad/Pavillions%20Thanksgivbing%202009/tn_DSCF4093.jpg

[Bill Pritchard]

[ QUOTE ]
We went to Apache Junction last night....

[/ QUOTE ]

Hey, you were *almost* out to my neck o' the woods http://www.yenko.net/ubbthreads/images/graemlins/smile.gif Tis a long haul from your house, no?

[4onthefloor]

http://i852.photobucket.com/albums/ab89/4onthefloor/S5002400.jpg (http://s852.photobucket.com/albums/ab89/4onthefloor/?action=view&current=S5002400.jpg) My '73 454 all dressed up- I did put a Gm performance aluminum hi flow water pump on it... That chevelle is Gonna be REALLY cool with that Big Block in it.. Nice car http://www.yenko.net/ubbthreads/images/graemlins/Can-I-Have-It.gif

[Xplantdad]

[ QUOTE ]
[ QUOTE ]
We went to Apache Junction last night....

[/ QUOTE ]

Hey, you were *almost* out to my neck o' the woods http://www.yenko.net/ubbthreads/images/graemlins/smile.gif Tis a long haul from your house, no?

[/ QUOTE ]

Cripes yes...I think we were almost in New Mexico! http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

Actually, we were off of Brown Rd. and not too far from San Tan Flats!

We need to get together http://www.yenko.net/ubbthreads/images/graemlins/beers.gif http://www.yenko.net/ubbthreads/images/graemlins/headbang.gif

[Xplantdad]

[ QUOTE ]
My '73 454 all dressed up- I did put a Gm performance aluminum hi flow water pump on it... That chevelle is Gonna be REALLY cool with that Big Block in it.. Nice car http://www.yenko.net/ubbthreads/images/graemlins/Can-I-Have-It.gif

[/ QUOTE ]

Thanks Hector! http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[beater68427]

Most of the 73 TRK blocks have steel cranks with a 2 bolt block, I have 6 of them and only one is cast.

[CC Rider]

Nice score Bruce! Maybe by the time the swap is completed, I'll be there to see the finished product myself! http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif