View Full Version : Phase III Super/Spark CD system instructions
Fantomas
10-29-2011, 05:52 PM
Looking for the instructions to the Phase III ignition box, thanks.
are you just looking for the wire diagram to install it or whole book?
Fantomas
10-30-2011, 06:08 PM
Wire diagram for installing it but either will be fine.
Okay, I'll share some pics, but don't ask me how I took this picture. Welcome to the site. Please post more about your project. The more pics the better.
Paul III
http://i710.photobucket.com/albums/ww101/Plowman7/Ignition/ScottMP3.jpg
Fantomas
10-31-2011, 03:43 AM
Thanks Paul.
About my project, I am working on a 70' Camaro B/M clone that I have owned since 2008. Original 307 car, when purchased was a Z clone. Currently the car has a stock 454 mill, stock pistons, crank, mild cam with a 350 Turbo tranny and 3:42 rear gears.
I've just pretty much finished my 1969 Chevelle and now getting started on the Camaro for the winter. I'm replacing the stock 454 with a 505 BBC, which has Mahle pistons 11:1 compression, a 4.25 forged Scat crank, Crane Cams mech. flat tappet .580/.600 lift, Edelbrock TR2X tunnel ram topped with dual 600 Holleys, 8 qt. lubrication system. All of that will be backed up by a 400 Turbo trans, shift kit and a 5000 stall convertor. I'm thinking somewhere along the lines of 700 hp :drool:
I have the powerplant nearly completed and ready to go into the car. After that there will be some dressing up to do, which really isn't much. New paint, wheels and tires, etc. I'll try and have pictures up soon.
Fantomas
11-19-2011, 03:42 AM
Still looking.
Or better yet where does the blue wire attached to the toggle switch connect to?
Blue wire to engine ground, such as a carburetor bolt they recommend.
It actually isn't a ground wire, it senses the voltage kick when spark jumps from the center electrode to the side electrode. If the blue wire is not properly connected, you loose 70% of the systems ability to sense engine needs.
scott s
11-19-2011, 02:42 PM
Paul helped me on the hookup of my box also thanks. i believe the blue wire gets grounded thou.
Adam Tuckman just sent me a file with these in it and I'm posting with his approval. Pretty cool to see some original literature on hooking up one of these boxes from Motion. Don't think this actually addresses the blue wire issue, but we sorted that out above.
http://i710.photobucket.com/albums/ww101/Plowman7/Ignition/PHASEIIICD1_1.jpg
http://i710.photobucket.com/albums/ww101/Plowman7/Ignition/PHASEIIICD1_2.jpg
http://i710.photobucket.com/albums/ww101/Plowman7/Ignition/PHASEIIICD1_3.jpg
http://i710.photobucket.com/albums/ww101/Plowman7/Ignition/PHASEIIICD1_4.jpg
http://i710.photobucket.com/albums/ww101/Plowman7/Ignition/PHASEIIICD1_5.jpg
Fantomas
04-07-2012, 05:03 AM
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash3/547020_356153504437150_682727358_n.jpg
Fantomas
04-07-2012, 05:07 AM
Well, if I knew how to get photos up I'd share, heh.
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash3/547020_356153504437150_682727358_n.jpg
Looking good mounted on the firewall. How does it run?
Fantomas
04-07-2012, 04:32 PM
It hasn't been driven on the street yet, just finished re-doing the rear end. The exhaust isn't hooked up either so heh. But I'm trashing the exhaust its got now for chromed outside sidepipes. Though driving it around the driveway, it's pretty stout, just begging to hit the streets lol.
Fantomas, here are more of those pics you have. I think you got it working now. Fill out your profile a bit more, I don't even think we know your name. Looking good man!
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/526764_356154444437056_100001275099585_1063194_146 1987517_n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/523296_356154891103678_100001275099585_1063195_876 148779_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/292210_356156001103567_100001275099585_1063198_195 3052495_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-prn1/s720x720/527152_356156247770209_100001275099585_1063199_128 8043714_n.jpg
Plowman
04-07-2012, 09:29 PM
Look's good,ready,and Quick. I like it.
Hemicolt
04-07-2012, 11:05 PM
Sullivan county.... you are in my back yard. I live in Jonesborough.
Great project, very nice.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.