Log in

View Full Version : 1969 Chevelle Horns and Wiring


Zach Carter
02-06-2012, 03:12 PM
Does anyone have any pictures of how the dual hornes are supposed to me mounted on the hood latch? I also need to see how the wiring from the horn relay to the horns is supposed to be routed. Any help is appreciated. I should have taken better pictures...

Don_Lightfoot
02-07-2012, 12:51 AM
Here's a couple of images Zach. Hopefully they will help.

http://www.pbase.com/don_lightfoot/image/141343614.jpg

http://www.pbase.com/don_lightfoot/image/141343615.jpg

Postsedan
02-13-2012, 11:26 PM
Don`t forget the horn wire clip(s).... not pictured in Don`s photo.

Dan

Zach Carter
02-14-2012, 12:30 AM
Thanks for the picture. It did help. I'm also trying to see how the harness comes off the horn relay and routes to the horns.

Postsedan
02-14-2012, 01:02 AM
Zach,

Simply run wire through the hole (with the factory grommet) attach to harness... run the wires up under the header panel, use the clips (shown in picture)

Shows complete illustration in assembly manual.

http://img.photobucket.com/albums/v677/Postsedan/Postsedan2012/P1010684.jpg

Dan