daverd
02-12-2012, 08:00 PM
I have a 68 455 engine and parts to sell....(due to my other
project car parts being ripped off..)
c casting heads ported by Joe Mondello
(possibly the last ones he did.)
I waited a LONG time for these...
heads feature street strip porting
filled heat crossovers, hardened seats
stainless manley valves with valvesprings retainers ect.
set up for harland sharp roller rockers ( I have 3/8 studs)
with rockers,)guideplates comes with edelbrock
o4b holley flange intake ..port matched to heads.
and edelbrock finned valve covers
I have stock bore block (needs bore) stock rods with new
arp bolts 10/10 crank nodular iron and deep oil pan
hi flow pump w special machined bottom plate
oil restrictors deep miladon pan (new pan pump ect)
new 750 holley carb mech secondarys
plus various odds n ends 3000.00 (i have that + into heads
alone.) <<GRAEMLIN_URL>>/frown.gif
thanks Dave
project car parts being ripped off..)
c casting heads ported by Joe Mondello
(possibly the last ones he did.)
I waited a LONG time for these...
heads feature street strip porting
filled heat crossovers, hardened seats
stainless manley valves with valvesprings retainers ect.
set up for harland sharp roller rockers ( I have 3/8 studs)
with rockers,)guideplates comes with edelbrock
o4b holley flange intake ..port matched to heads.
and edelbrock finned valve covers
I have stock bore block (needs bore) stock rods with new
arp bolts 10/10 crank nodular iron and deep oil pan
hi flow pump w special machined bottom plate
oil restrictors deep miladon pan (new pan pump ect)
new 750 holley carb mech secondarys
plus various odds n ends 3000.00 (i have that + into heads
alone.) <<GRAEMLIN_URL>>/frown.gif
thanks Dave