1968 Z28 what to look for?

[beater68427]

In my barn hunting I found a 4 leaf 12 bolt camaro, but has manual discs did they do this? what other things would I look for to determine if it is a Z28, no engine or trans it is a 4 speed car.

[resto4u]

It had to have power brakes. also a special 15" tire sticker in the glove box door.

[Edgemontvillage]

This link should provide a good starting point:

http://www.camaros.org/diffs68.shtml

[Stefano]

There are some other clues to look for also.

Single 3/8" Fuel line and sending unit.

Specific emblems, holes and placement.

Look for signs of original white paint stripes in the cowl vent area.

Close Ratio Pitman Arm

Tachometer Red line

etc.

[beater68427]

Im going to check the car out again, I was looking at another one there then started thinking about the rear springs last night on the 68, It was originally lemans blue on blue but in the 70's 80's era im guessing it got one of those real nice custom dark blue light blue and yellow zig zag stripes I smoke alot of dope paint jobs.... so no emblems I will check the back side of the fenders and glove box, tac etc this time.

[69SSZL1]

Glove box sticker not proof anymore. Documented 15" wheel option found on that 68 SS with the same sticker that Z/28's had.

[SuperNovaSS]

I would say it is a pretty good sign based on the other things he has mentioned.


Jason

[69SSZL1]

Single fuel line, 12 bolt and 4 leaf springs not at all proof of Z/28.

[MosportGreen66]

Just curious, what 15 inch wheel was used on a '68 SS Camaro that would be symanomous with a '68 Z28?

I'm eager to learn more about the '68s.

Thanks,
Dan

[beater68427]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 69SSZL1</div><div class="ubbcode-body">Single fuel line, 12 bolt and 4 leaf springs not at all proof of Z/28. </div></div>

I would agree, I was not there to look at this car but another car but last night I thought about the rear and springs and the gears got grinding so I need to go back for a inspection. we will see....

[subyman99]

My 68 ss had factory 15&quot; wheels, window sticker and glove box say 15&quot;

Matt

[Jack_Tar]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 69SSZL1</div><div class="ubbcode-body">Glove box sticker not proof anymore. Documented 15&quot; wheel option found on that 68 SS with the same sticker that Z/28's had. </div></div>

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 69SSZL1</div><div class="ubbcode-body">Single fuel line, 12 bolt and 4 leaf springs not at all proof of Z/28. </div></div>

No, it is not proof that a car is a Z28, but it does narrow the field of what is could be. It is my understanding that these items only came on the Z28 and L78 cars. L78 is also a rare piece and highly sought after.

I may be wrong and if so I look forward to the education that this post will bring.

[OldZ28Owner]

Not all 68 Z28's had stripes. I ordered a British Green one without stripes and got it that way. I don't think that this was uncommon, to not have stripes, either.

[beater68427]

Im going to check it out again, good chance its nothing but from what I gather I will look at fuel line glove box lid speedo cable exit steering (manual car) for quick ratio (does anyone know the casting numbers?) and tachometer.

[Stefano]

No one part will 100% guarantee that you have a '68 Z28, especially 45 years after it was built. The car itself, the history and the summation of the original cumulative parts etc...can help narrow the possibilities.

I have seen 1968 15&quot;glove box wheel stickers on cars that never actually came with 15&quot;s.

3/8&quot; line was also 2bbl V8s.

[Mr70]

Good call on the 2bbl.
I have found that to be true also..

[beater68427]

Still been trying to go take another look, one of those real hard sorts to deal with he wants to sell it all but now he doesnt want anyone to look at his stuff??? makes it a bit tough, might have to pass this one by...

[miket1]

Also, look for signs of factory dual exhaust.
68 Z28 came with 15x6 wheels from the factory.

[Big Block Bill]

&quot;(does anyone know the casting numbers?) If I remember right the quick ratio pitman arm ended in 6225 or 225.

Bill

[foster]

my option on a 1968 z28 if it does not have original paper work don,t buy it <<GRAEMLIN_URL>>/worship.gif