Black L78 1969 SS396 300 Deluxe Post Sedan Found

[Postsedan]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ryan1969Chevelle</div><div class="ubbcode-body">PS: What is that Crimson Red tail light?

Ryan </div></div>

Oh, that`s just one of those '69 Cutlass S W`31 Post Sedan`s....no biggie <<GRAEMLIN_URL>>/rolleyes.gif

Please tell him Rick

Dan

[Day2_69Z]

I'll take a stab at that crimson red tail light .....

77 Monte Carlo in Firethorn Red......
Could be a 76.....
With out the cover its throwing me.

[earntaz]

Awesome work -- what paint brand/system did you use? TAZ

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Day2_69Z</div><div class="ubbcode-body">I'll take a stab at that crimson red tail light .....

77 Monte Carlo in Firethorn Red......
Could be a 76.....
With out the cover its throwing me. </div></div>

It's a `74 Monte, that is an original owner car getting it's 2nd or 3rd build rendition, and has really got a ton of mods done to it.
Powered by what was a 1000 HP Blown big block, but was detuned to around 750.

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">Awesome work -- what paint brand/system did you use? TAZ </div></div>

Dupont PPG paint, not sure on the brand of clear coat.
Spies-Hecker primer under that, and DP90 under that, and LOT'S (hours and hours)of sanding between coats of primer. Literally made our fingers bleed at least once.

Kind of like the 1 line in the Bryan Adams song.
https://www.youtube.com/watch?v=9f06QZCVUHg

[Postsedan]

Blood Red Black <<GRAEMLIN_URL>>/biggthumpup.gif

Dan

[chevyman0429]

Rick
Looking amazing nothing like a a super straight, super sexy black paint job. I like everyone else looking forward to any and all pictures.
<<GRAEMLIN_URL>>/headbang.gif

[earntaz]

Again Rick -- looks awesome!

[Rixls6]

Thanks guys, I appreciate it, and I also let my body man know about the positive feedback.

[Postsedan]

Eric Rocks!

Dan

[kwhizz]

<<GRAEMLIN_URL>>/worship.gif <<GRAEMLIN_URL>>/worship.gif <<GRAEMLIN_URL>>/worship.gif <<GRAEMLIN_URL>>/worship.gif

[Rixls6]

Things have been progressing slowly, but I should have the rear end done and ready to install by next week.
I had to have a guy at Chassis Service turn the driver side axle tube back into position, as apparently the plug weld broke loose on that side.
We then had them install a new Eaton 4-series posi and a new 4.10 ring and pinion, as well as all new bearings, etc.
Nothing much to see far as pictures go on that.

I also had to straighten and body work the original disc brake backing plates, then Kevin over at Nostalgic gave me a duplication of galvanizing like they looked in `69.
The floor plug is original galvanizing for comparison.

http://www.yenko.net/ubbthreads/pics/usergals/2015/07/full-3463-29589-dscf7797.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2015/07/full-3463-29590-dscf7798.jpg

[Xplantdad]

Looks good Rick!

[Ryan1969Chevelle]

Is that the original KK? Now back to original?

Ryan

[Postsedan]

Rick,

Looks very nice <<GRAEMLIN_URL>>/biggthumpup.gif

Dan

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ryan1969Chevelle</div><div class="ubbcode-body">Is that the original KK? Now back to original?

Ryan </div></div>

Yes we were able to save the original KK rear, but it took a bit to make it right again.

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ryan1969Chevelle</div><div class="ubbcode-body">Is that the original KK? Now back to original?

Ryan </div></div>

Yes we were able to save the original KK rear, but it took a bit to make it right again. </div></div>

Well worth it!!

A real highway cruiser gear:-)

Ryan

[Rixls6]

My JD code engine is done, and will be dyno-run this Tuesday. (Finally!)
Video to follow afterwards.

[Ryan1969Chevelle]

Looking forward to the dyno run!!!!

I am planning to dyno/break in my engine when the time comes. Makes sense to me!

Ryan

[69 Post Sedan]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body">My JD code engine is done, and will be dyno-run this Tuesday. (Finally!)
Video to follow afterwards. </div></div>

<<GRAEMLIN_URL>>/biggthumpup.gif

[Rixls6]

Ok, so we got a short video of my 69 .070 over L78 396. 459 hp @5900rpm
Nice flat torque curve. Video below.
PICS
http://www.yenko.net/ubbthreads/pics/usergals/2015/10/full-3463-33391-dscf7948.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2015/10/full-3463-33392-dscf7955.jpg
Video
https://youtu.be/ppkNPMt__1g

[Ryan1969Chevelle]

&quot;Sounds Happy&quot;

Ryan

Sure does!!!!'n

[Postsedan]

Awesome!

Your video's are great - kind of like a bad roller coaster ride - love it.
Did you get the engine home safe?
Is she going in tomorrow?

Dan

[Rixls6]

Picking the engine up this afternoon.
It will be a day or 2 before it goes in.

[Postsedan]

Great! Fun <<GRAEMLIN_URL>>/biggthumpup.gif

Dan

[chadk]

Still my favorite thread on the whole internet!! <<GRAEMLIN_URL>>/beers.gif
Chad

[JpMotorsports]

Sounds awesome!. This things is going to be wicked when done!

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JpMotorsports</div><div class="ubbcode-body">Sounds awesome!. This things is going to be wicked when done! </div></div>

Thanks, I agree, smoke `em as long as you keep your foot in it.

[chevyman0429]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: chadk</div><div class="ubbcode-body">Still my favorite thread on the whole internet!! <<GRAEMLIN_URL>>/beers.gif
Chad </div></div>


X2.

<<GRAEMLIN_URL>>/worship.gif

[COPO_Anders]

Hi Rick !

I just realized your engine is .070 over and that made me think about a .060 over CE 396 that I have. My CE block has some scratches so I can´t use it as it is. Would .070 over be the absolute maximum size on a 396 block or can it be bored even bigger ? I´m not sure .070 would be enough on my block, and that´s why I ask.

Anders

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: COPO_Anders</div><div class="ubbcode-body">
Hi Rick !

I just realized your engine is .070 over and that made me think about a .060 over CE 396 that I have. My CE block has some scratches so I can´t use it as it is. Would .070 over be the absolute maximum size on a 396 block or can it be bored even bigger ? I´m not sure .070 would be enough on my block, and that´s why I ask.

Anders </div></div>

Hi Anders,
If you have your block sonic tested, some times they can be bored as much as .125 safely.

[69 Post Sedan]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: COPO_Anders</div><div class="ubbcode-body">
Hi Rick !

I just realized your engine is .070 over and that made me think about a .060 over CE 396 that I have. My CE block has some scratches so I can´t use it as it is. Would .070 over be the absolute maximum size on a 396 block or can it be bored even bigger ? I´m not sure .070 would be enough on my block, and that´s why I ask.

Anders </div></div>

Hi Anders,
If you have your block sonic tested, some times they can be bored as much as .125 safely. </div></div>

X2......my block is .070 over also. It comes out to 410 cubic inches.

Kurt

[earntaz]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: COPO_Anders</div><div class="ubbcode-body">
Hi Rick !

I just realized your engine is .070 over and that made me think about a .060 over CE 396 that I have. My CE block has some scratches so I can´t use it as it is. Would .070 over be the absolute maximum size on a 396 block or can it be bored even bigger ? I´m not sure .070 would be enough on my block, and that´s why I ask.

Anders </div></div>

Hi Anders,
If you have your block sonic tested, some times they can be bored as much as .125 safely.</div></div>

Agree -- have seen it done ... but you HAVE TO sonic check first or the bore job may get wet. TAZ

[Rixls6]

Finally got the engine and trans set into place.
Steering linkage about ready to put on as well as the manual steering box.
Need to get the exhaust and install it before setting the body back on.

http://www.yenko.net/ubbthreads/pics/usergals/2015/11/full-3463-33895-dscf7970.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2015/11/full-3463-33896-dscf7975.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2015/11/full-3463-33897-dscf7976.jpg

[Postsedan]

Awesome <<GRAEMLIN_URL>>/biggthumpup.gif <<GRAEMLIN_URL>>/headbang.gif <<GRAEMLIN_URL>>/biggthumpup.gif <<GRAEMLIN_URL>>/headbang.gif

Very Exciting!

I bet your '70`s are crying.....&quot;Rick, what about us&quot; <<GRAEMLIN_URL>>/naughty.gif

Dan

[chevyman0429]

Iv been waiting on this. <<GRAEMLIN_URL>>/beers.gif

[earntaz]

Awesome tie rod -- is that an factory HP item? LOL

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">Awesome tie rod -- is that an factory HP item? LOL </div></div>

You like that, I can make one for you too for a small fee. <<GRAEMLIN_URL>>/wink.gif

[JpMotorsports]

Awesome progress! That has to be a cool feeling

[Ryan1969Chevelle]

I love how mechanical and how simplistic these old cars are!!!

Lots of forward motivation and little else!!

Ryan

[PeteLeathersac]

W<<GRAEMLIN_URL>>/headbang.gifW and things are looking really great!
A lot like what your place will be like this time next year Ryan?

<<GRAEMLIN_URL>>/beers.gif
~ Pete

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PeteLeathersac</div><div class="ubbcode-body">

W<<GRAEMLIN_URL>>/headbang.gifW and things are looking really great!
A lot like what your place will be like this time next year Ryan?

<<GRAEMLIN_URL>>/beers.gif
~ Pete
</div></div>

Absolutely!!!

Ryan

[earntaz]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">Awesome tie rod -- is that an factory HP item? LOL </div></div>

You like that, I can make one for you too for a small fee. <<GRAEMLIN_URL>>/wink.gif </div></div>

Nah -- I have an electrician friend down the street and he always has electrical conduit layin' around ... excellent idea! <<GRAEMLIN_URL>>/beers.gif

[Rixls6]

Thanks to Ryan,<<GRAEMLIN_URL>>/biggthumpup.gif I now have an NOS rubber floor cover for this.
Pictures when I do the install soon. <<GRAEMLIN_URL>>/smile.gif

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body">Thanks to Ryan,<<GRAEMLIN_URL>>/biggthumpup.gif I now have an NOS rubber floor cover for this.
Pictures when I do the install soon. <<GRAEMLIN_URL>>/smile.gif </div></div>

Paul Martin gets credit for sharing that a friend of his was selling a rubber mat for a Post Oldsmobile, (I didn't realize it was NOS till later) and I will take credit for asking if an Olds mat is the same as a Chevy.......Yup..... then &quot;MCACN brain&quot; set in and I forgot about it for a full day....... then while chatting with Rick POP I remembered about the mat :-) Whew, I am so glad no-one snatched it up in the mean time.

So now I have heard of two NOS Mats:-)

Ryan

[Postsedan]

Not Exactly 100% correct for a Chevelle......but go try and find a 3rd NOS mat <<GRAEMLIN_URL>>/naughty.gif

Dan

[Bill Pritchard]

If you find a blue NOS rubber floor covering, let me know!

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bill Pritchard</div><div class="ubbcode-body">If you find a blue NOS rubber floor covering, let me know! </div></div>

We will definitely keep the eyes peeled for one, or more Bill.

[Ryan1969Chevelle]

If another black Olds mat comes available I have a friend who needs it for a very deserving 69 F85!!!!

El Malo needs the best mat we can find her!!!

Ryan

[Alss]

and if ya find a green one.......!!! <<GRAEMLIN_URL>>/grin.gif...please...

I think we may need a 300 specific area here...mods? <<GRAEMLIN_URL>>/dunno.gif

[Rixls6]

A bit of progress.
The body is back on the frame.
Forgot to take pics of the chassis with the exhaust and other small pieces installed.
The manifolds shown are not the ones that will be used, but the ones I will be using are still at the powder-coaters.

Had to touch up the frame rail by the steering box, then we put in the new headliner from SMS Autofabrics. Eric again performing his magic.
http://www.yenko.net/ubbthreads/pics/usergals/2015/12/full-3463-36291-dscf8020.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2015/12/full-3463-36292-dscf8021.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2015/12/full-3463-36293-dscf8024.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2015/12/full-3463-36294-dscf8025.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2015/12/full-3463-36295-dscf8028.jpg

[mockingbird812]

Nice - looking great!!! <<GRAEMLIN_URL>>/biggthumpup.gif

[Postsedan]

Well done Eric and Rick <<GRAEMLIN_URL>>/youguysrock.gif

Dan

[earntaz]

Awesome! <<GRAEMLIN_URL>>/worship.gif

[JpMotorsports]

amazing looking!

[chevyman0429]

I have no idea how I missed this update as I normally check everyday for new updates on this beauty. Apparently I'm slacking.

[Alss]

sweet!

[Rixls6]

Should I do this to it? <<GRAEMLIN_URL>>/wink.gif
https://www.youtube.com/watch?v=7fo2jhcni3o#t=57

Anybody know the car in that video?

[black69]

might be fast, but looks ugly to me, like the top intake is too big.
Blowers look good on a 62 vette, or a 32 ford....
looks like another post car in the video, you 'post' guys must like that <<GRAEMLIN_URL>>/smile.gif

Black car with black top blower like this, would maybe look nice...

https://www.youtube.com/watch?v=Xpw6RovYXW4

[chevyman0429]

Not trying to be pushy lol any progress on this beauty

[Rixls6]

Soon as the other one gets out of the shop, we'll get back on it.

[Ryan1969Chevelle]

Do side by side body off restorations:-)

Ryan

[chevyman0429]

Just checking in lol <<GRAEMLIN_URL>>/dunno.gif

[Rixls6]

Spending all my time on a house for my daughter.
Wish I could clone myself.

[Postsedan]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body">Spending all my time on a house for my daughter.
Wish I could clone myself. </div></div>

That would be twice as much fun at Jefferson and twice as much food for Kurt to make <<GRAEMLIN_URL>>/biggthumpup.gif

Dan

[Ryan1969Chevelle]

I think a replica would be better:-)

Ryan

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ryan1969Chevelle</div><div class="ubbcode-body">I think a replica would be better:-)

Ryan </div></div>

Or maybe a replica that could also self-replicate.
Then I/we could take on tons of jobs. <<GRAEMLIN_URL>>/crazy.gif

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Postsedan</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body">Spending all my time on a house for my daughter.
Wish I could clone myself. </div></div>

That would be twice as much fun at Jefferson and twice as much food for Kurt to make <<GRAEMLIN_URL>>/biggthumpup.gif

Dan
</div></div>

Now you're talking about some great fun.

[Postsedan]

<<GRAEMLIN_URL>>/haha.gif

Dan

[chevyman0429]

Rick I just spent all day swinging from trees trimming for my oldest sons first house. I feel your pain buddy. There definitely isn't enough day light in a day. Found out last week I'm gonna be a grandfather wasn't looking forward to this at my age but apparently it's not my choice lol. It's all good both my sons are business owners and doing very well. Thank god!

[Postsedan]

Mike,

A big Congrats on soon becoming a Grandpa <<GRAEMLIN_URL>>/biggthumpup.gif

Dan

[chevyman0429]

Thanks Dan the news was giving to me on my birthday I was shocked to say the least.

[Postsedan]

I remember the look on my Dad's face when we told my Parents that they were going to be Grand Parents - Priceless <<GRAEMLIN_URL>>/headbang.gif

Dan

[chevyman0429]

Just showing some love for a particular 69 post car! <<GRAEMLIN_URL>>/3gears.gif

[wheelhop]

Rumor has it the doors will be hung on this car this week

[chevyman0429]

Very nice iv been waiting on some updates.

[Rixls6]

Yes, we finally hung the doors.
Hope to do a bit more assembly now that the car is off the rack where its been hiding.

[chevyman0429]

Great news Rick.

[69 Post Sedan]

<<GRAEMLIN_URL>>/headbang.gif

[chevyman0429]

I have a close friend doing a 69 Canadian berger post car. If he wasn't so private I'd share some pics. The car went from a dam near rust free basket case to only needing paint and final assembly in around 6/8 months. It's gonna be stunning.

[Rixls6]

Is that the blue/blue one?

[Ryan1969Chevelle]

Dusk:-)

Docs:-)

LIKE!!

Ryan

[chevyman0429]

Yes Rick it is. The guys a mad man doing every single thing in his two car attached garage except stitching up the interior. Everything got restored or NOS parts. Kinda blows my mind he works full time and has made the type of progress and perfection he has.

[Rixls6]

Yeah, I actually thought about trying to buy that car when it came up for sale.
Will be nice to see it finished.

[Rixls6]

Had to order all new glass as several scratches were found in the original. Am rebuilding the vent window frames, and getting the old rubber out was a pain as it was rock hard and came out in chunks.

http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-3463-56846-20170127_144018.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-3463-56847-20170127_150103.jpg

[wheelhop]

That color brings back memories

[Postsedan]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body">Yeah, I actually thought about trying to buy that car when it came up for sale.
Will be nice to see it finished. </div></div>

You will see it in 2019 <<GRAEMLIN_URL>>/biggthumpup.gif

Dan

[Postsedan]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wheelhop</div><div class="ubbcode-body">That color brings back memories </div></div>

The &quot;Cowboys&quot; Favorite Color.

Dan

[wheelhop]

Rick,
how about a pic of the car with the doors hung?

[Rixls6]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wheelhop</div><div class="ubbcode-body">Rick,
how about a pic of the car with the doors hung? </div></div>

Soon as I get all the glass in, I'll take a few pics.
Eric's coming out Tuesday to do a couple touch-ups, then I can finish all the outer emblems and whatnot.

[Rixls6]

Got the doctor back in the house.
Correct trunk spatter done, rear panel satin black applied, and a few other small items done.

[Ryan1969Chevelle]

Wowza.

Looks very good.

Can't wait to see this bad boy.

Ryan W.

[chevyman0429]

Yup just made my day been waiting on some updates on this one. I love that splatter paint looks great.

[chevyman0429]

Now if I remember correctly this car does not get the B90 trim correct!

[Rixls6]

Correct, no B90 trim.

[PeteLeathersac]

Correct, no B90 trim.


All's looking really great, can't wait to see the final result!
No sissy chrome B9:ooo: is just icing on the cake, sorry Ryan.

:burnout:
~ Pete


.

[Postsedan]

No B90.....less is better on a Post Sedan. Rick - Gets It!

Dan

[Postsedan]

Check out that NOS trunk seal :D

Are the ends in the correct location? Hard to tell from the picture.

Eric is Da Man!

Dan

[Ryan1969Chevelle]

I would slather that black car in trim!!!!!

B90, B80, and Door edge trim :-)

Ryan

[DW31S]

I was just gonna say Ryan will have a coronary when he hears no B90! Personally, I don't care for it; rather have the painted frames myself. That car has come a looooong way. Congrats on the progress.

[BowtieGent]

Just read thru this entire thread again. A perfect example of a proper restoration that a Chevelle like this deserves.

I will revisit this thread often thru-out the course of my Chevelles restoration.

[chevyman0429]

Any updates Rick?

[Ryan1969Chevelle]

Rick, this old girl needs some love:-)

Ryan

[Rixls6]

In the midst of a full-blown basement remodel, and injured my back. Slow recovery sucks.

I will get back after this car asap.

Anybody have a NOS driver's door weatherstrip?
I have one for the passenger side.

[Peter426]

Here's a photo of one from back in the day.

https://image.ibb.co/jQfgub/TVD855.jpg

[Rixls6]

Thanks for posting that pic.
That is the 2nd 300 Deluxe SS that I've seen with bright rocker spear.

Wonder if that is Park Ridge, IL

[Peter426]

Thanks for posting that pic.
That is the 2nd 300 Deluxe SS that I've seen with bright rocker spear.

Wonder if that is Park Ridge, IL

You're welcome. I believe this photo is from Thunder Valley Dragways in South Dakota.

[Rixls6]

Working on getting this car again to take to NOCC show in early August, then to MCACN in November.

[Postsedan]

Looking great Rick :)

It will a very exciting Summer and Fall for you.

I will go and search my parts for that part that you need.

Dan

[m22mike]

Rick
Hope you git er done for the Chevelle show, can't wait to see Black Beauty :biggthumpup:

Mike

[Flying Undertaker]

I know Steve Koppien through drag racing at either Byron Dragway or Topeka Raceway some years ago, when he was racing a '69 COPO Camaro. It's cool that he raced that car way back then. Cool find! Don.

[Ryan1969Chevelle]

Did you decide to stay with the pink engine colour?

Ryan W.

[Rixls6]

Did you decide to stay with the pink engine colour?

Ryan W.

HaHa, no.
Pulled the engine and repainted, now back in.

[wheelhop]

Glass hung yet? It's only been 2 years give or take!

[Rixls6]

Glass is in as of last night.

[wheelhop]

I had heard the Doctor was coming over to help with that

[Postsedan]

Glass hung yet? It's only been 2 years give or take!

Really?

Geez, give the man a break....he is just recovering and now is in therapy for a broken hip.
Rick is working everyday to get the car ready for the NOCC.

Rick let me know if you still need any of those parts we had discussed.

Dan

[Rixls6]

Will check the parts to see which side I need.
Thanks

[Postsedan]

:)

Dan

[Rixls6]

Getting some interior installed.
Front clip by end if the week hopefully.

[olredalert]

----Looks so cool, Rick! Terry would have loved it. Can't wait to see it soon......Bill S

[Rixls6]

Ohio in August.

[Ryan1969Chevelle]

As long as you get something done each day it is possible!!!

Ask me how I know :-)

I can’t imagine doing a car at this level, no room for compromise....

Call me any time, I can cheer you on!

Ryan W31

[wheelhop]

Looking good Rick! Let me know if you need a hand with anything. My In-Laws are in town for and unknown amount of time and could use an excuse to get out of the house!

[69PostSSChevelle]

Jim,
If you need an excuse for a couples days I have a spare room and you can help with mine.

RP

[Postsedan]

Those seats look all too familiar :)

Looking good :)

Dan

[Rixls6]

With a big push to finish the car for the NOCC show in Ohio, the car is almost finished (are they ever?).

[70LT1Z28]

very nice job long progress.

[m22mike]

Rick
So glad to finally see your car a the Chevelle show. Outstanding :worship:

Mike

[olredalert]

----Rick,,,Couldn't make it to Ohio as I had a great boat show 4 miles from my house. Wish I had been there to see your preview and the rest of the 69's. With that said the car just looks crazy nice. Terry would have loved it, of course!!!...….Bill S

[RPOLS3]

Looks great Rick - need more pictures!

[mockingbird812]

Looks great Rick - need more pictures!



Yeah Rick, what he said!!!!!!!!

[wheelhop]

Rick is about recovered from getting this car ready for the show. Here are a few more pics that I have of this cool car!

[m22mike]

Awesome car, well done Rick..:drool:

[COPO]

Very nice.

[scuncio]

Amazing transformation. I remember looking at that thing month after month on Craigslist....

[Rixls6]

Still have some things to finish up before MCACN, but mostly just stickers and some cleaning.

[tunes]

Rick - I looked your Chevelle over at the NOCC show and was impressed with how it looked. I wish I had known the whole story of it at that time. Now that I've read this whole thread I'm really amazed at the work you did and how it all turned out. Great job and great car!

[Rixls6]

Thanks for the compliment.
Yes, it was quite a challenge, but a lot of fun.

[RPOLS3]

Looks great Rick - thanks for sharing. Looking forward to seeing it at MCACN.

[WILMASBOYL78]

Since I have a thing for black L78 cars :smirk:

All I can say is...amazing :worship::worship::worship:

-wilma

[mockingbird812]

Wow and WOW!!!!! Fantastic. She’s come a long way. Congrats!!

:3gears::3gears::3gears::3gears:

[Xplantdad]

Wow and WOW!!!!! Fantastic. She’s come a long way. Congrats!!

:3gears::3gears::3gears::3gears:


x 100!~!

[Woj]

Beautiful car Rick. Absolutely stunning! Great build. Phil Woj

[John]

…

… It is really amazing at the number of guys on this site that take the time and money to restore these cars to this level.

... These guys are real artist in the detail that that they put into these cars

.... and then bring them to a show like MCACN for anyone to view .

… Wow... Just simply amazing work. What a beautiful Chevelle!

… Great job!

:beers:

[Rixls6]

Got a goodie bag from the original selling dealerin Nappanee, IN
Included in the items was a key fob with dealer's name and an old plate from the 60's or 70's that they put on their cars back then.

[RPOLS3]

Cool!

[m22mike]

That is neat Rick :biggthumpup: Glad I got to see your car at the Chevelle show in August.


Mike

[mockingbird812]

Well that was a nice gesture! Congrats Rick! Looks sweet on yr 'velle!!!!

[Tracker1]

I re-read this entire thread last night. Rick, this is an amazing save of a deserving car. Be prepared to have soreness after MCACN because of all the pats on the back. Be proud sir, what an incredible journey for you and this old car. Will Eric be at MCACN? Any more contact made with the widow?

[Rixls6]

I did try to contact the widow again, but they didn't return my call after I left a voicemail.
I will try her once more.

Yes, Eric will be at MCACN, and thanks for your appreciation.

[Rixls6]

The car scored pretty well at the MCACN show, having 14 points deducted.
Now I can't wait for spring to start driving it!

[m22mike]

Black beauty :biggthumpup:

[Rainer]

Cool to get to see it in person! Great car!

[tunes]

Congratulations, Rick - you did a fantastic job of restoring it and it shows. Great looking Chevelle that I would love to own.

[mockingbird812]

Congrats Rick - well deserved! Some of you may not know this, but I have a special place in my heart for black ‘69 Chevelles - rumors around say that Woj may have similar proclivities!!!!:naughty:

[Bill Pritchard]

Now I can't wait for spring to start driving it!

You could ship it out to me in AZ and I could drive it for you....no waiting :naughty:

I had the silver one out for a spin today.

[67since67]

A '69 Chevelle doesn't get any better than that!!

[Rixls6]

The post sedans got some print.

https://www.hagerty.com/articles-videos/articles/2020/02/07/1969-chevelle-ss-396-not-your-run-of-the-mill-chevelle?fbclid=IwAR3Z5xgOO_H4D0njBIsdkVRanNEQ8yRO mwuZ2kggksr1hNZRg8VNbs7VW5o

[69PostSSChevelle]

Rick thanks for posting the Hagerty article. Well written.
A shout out to Dan V. and Diego R.

[chevelleheart]

Congrats , great looking Post car , and great write up!

[scuncio]

Looking forward to seeing this one in person. Its Detroit Craigslist pics are permanently etched into my brain ;)

[Rixls6]

Looking forward to seeing this one in person. Its Detroit Craigslist pics are permanently etched into my brain ;)

As they are in mine, Tony.
Not sure you will get a chance to see the car again unless you come to some local cruises by me, as I am not going to show this car again.

[450hp]

Hey Rick, was good to see you at Mcacn. Your black post car looked assume, in side and out. Hope to see you at NOCO. LS6 Steve.:3gears:

[Rixls6]

Hey Rick, was good to see you at Mcacn. Your black post car looked assume, in side and out. Hope to see you at NOCO. LS6 Steve.:3gears:

Thanks Steve, hope to see you there also.