Need Hurst shifter rod

[Don_Lightfoot]

1-2 rod for 69 Chevelle M21. Please email me if you can help. Thanks.

http://www.pbase.com/don_lightfoot/image/151437200.jpg

[Alss]

Don..I got a bunch of spare rods..let me see if I have one tomorrow.

[Don_Lightfoot]

Appreciate it Albert.

[crash]

Every Hurst rod has a number stamped into it, the number your looking for is 2438...

Hope this helps... Crash

[Don_Lightfoot]

OK Crash, thanks.

[L78racer]

summit has them. probably available from hurst too.
http://www.summitracing.com/parts/huu-2132438

[Don_Lightfoot]

Thanks racer. I'll see if Albert or someone else comes up with one today.

[Alss]

Sorry don, no good.

[Don_Lightfoot]

Thanks for the effort Albert. Just ordered it from Summit. I hate having to use retailers as their cross border shipping cost are outrageous ($34 for this one little part). I usually ship to a friend just over the border, but no time in the near term to go over and get it and the gas would be way more than this shipping. GRRRRRR.

[mockingbird812]

Hey Don. You been hammerin' on the L89 the way your supposed to? <<GRAEMLIN_URL>>/3gears.gif <<GRAEMLIN_URL>>/naughty.gif

[Don_Lightfoot]

As you noticed on my Facebook page Bruce it was the exact opposite. There is one small village half way between me and the city so I was downshifting to slow down coming home from Cruise Night. DUH – shifter goes berserk! Stuck in second gear at about 25 mph for the last five miles of highway was not appreciated by my fellow travellers that night. Checked it out the next morning and obviously the pin broke and the rod in question popped out. It ended up being jammed tight in the shifter mechanism. I think it got bent a bit as we could not get second gear to engage fully as the rod movement was being hindered by rubbing against an extruding part of the tranny.