Lynn
10-14-2013, 02:33 AM
I have never owned a Corvette, but used to work on a few C3's.
I believe these were used somewhere on the rear suspension or 3rd member. May be full of it though.
Measurements are as follows:
Widest point is 4.25 inches
Narrowest point is 3.375 (that's 3 and 1/8 for the math challenged)
Middle hole is 2.4375 (2 and 7/16)
Thickness of each is .030.
Hopefully someone can use these.
Free. You don't even have to pay "shipping" since they will fit in an envelope.
I believe these were used somewhere on the rear suspension or 3rd member. May be full of it though.
Measurements are as follows:
Widest point is 4.25 inches
Narrowest point is 3.375 (that's 3 and 1/8 for the math challenged)
Middle hole is 2.4375 (2 and 7/16)
Thickness of each is .030.
Hopefully someone can use these.
Free. You don't even have to pay "shipping" since they will fit in an envelope.