Holley Gear Drive Conversion

[Fast67VelleN2O]

NOS Mr. Gasket gear drive conversion for vacuum secondary Holleys. Found at the bottom of a box today.

[daverd]

I want it......

[earntaz]

Back in the day -- installed many of these ... the only problem is dividing the 30cc pump shot into the four bbls. If you get a big lean bog -- swap out a 50cc REO pump type setup...

The TAZ

[69 Post Sedan]

That is really cool Matt. I'd love to have it just for a display.

Kurt

[Fast67VelleN2O]

It's a really cool piece. I've never seen an NOS kit before. I've only bought carburetors with these kits installed onto them. I know Eelco made a kit like this as well. I wonder if anyone else made a kit?

-Matt

[PxTx]

I have a few Eelco kits. The gears appear to be cast. I've seen some kits installed with what looks to be steel gears. Is that what you have Matt?

[Fast67VelleN2O]

I just put a magnet on them and it didn't stick so it can't be steel.

-Matt

[iluv69s]

My original Motion 3 barrel has some type of plastic gears...looks just like this kit...

[C1SS396]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Fast67VelleN2O</div><div class="ubbcode-body">It's a really cool piece. I've never seen an NOS kit before. I've only bought carburetors with these kits installed onto them. I know Eelco made a kit like this as well. I wonder if anyone else made a kit?

-Matt </div></div>

I have a spare holley 4346 on the shelf lets install it on that.

[Fast67VelleN2O]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: iluv69s</div><div class="ubbcode-body">My original Motion 3 barrel has some type of plastic gears...looks just like this kit... </div></div>


Is your Motion 3 barrel a 950 or 1050?

[iluv69s]

I always thought it was a 950... it's been many years since I used it.. It always leaked since I bought the car and even after rebuild, I could not get it to run right.....

basically it's like a giant 2 barrel now with this kit...

[Plowman]

Did you splice two secondary section of 950 cfm's.

[PxTx]

http://i287.photobucket.com/albums/ll150/jmarkaudio/LilBoA.jpg

[Fast67VelleN2O]

Here is my version of a Holley 2 barrel. Picked this gem up earlier this year. It's a Lorus

[Plowman]

*Basic Giant Two Barrel*I like it,that is cool too. Try two on a Tunnel Ram too.

[Plowman]

http://i710.photobucket.com/albums/ww101/Plowman7/9adce160-f6b5-497f-838e-5fe0808b687d_zps29e12060.jpg (http://s710.photobucket.com/user/Plowman7/media/9adce160-f6b5-497f-838e-5fe0808b687d_zps29e12060.jpg.html)

[ds1]

I have a Mr Gasket version gear drive in the pack. If someone wants to buy it, PM me. The three barrels were 950 and 1050 cfm. I have on that I have used but need the original secondary diaphragm. Can you still get them. I have seen the rebuild kit being the gaskets only.

[daverd]

Any body have a vacume pod for a 950 3 bbl for
Sale?

[69 Post Sedan]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: daverd</div><div class="ubbcode-body">Any body have a vacume pod for a 950 3 bbl for
Sale? </div></div>

PM Sent

[ds1]

Well I was wrong. I have a Rocket gear driven secondary kit. I also have one that was on a carb with black plastic gears. http://www.yenko.net/ubbthreads/pics/usergals/2013/11/full-13800-8139-im000001.jpg

[Old cam man]

Hi need gears to make new ones the right way

[DAVE H]

Hi need gears to make new ones the right way

I have a couple sets if you are looking for a template.