JR traction bars

[hiperf69]

I have a set of JR Traction bars
They are weld-on's for an "A" Body car.
These are painted Red,White and Blue.
They measure 32" from center line of axle
to the front mounting bolts.
Must be from the '70s
They are 2x3 tubing and center line is at 7" from the inside
edge of lower trailing arm mount,and must mount in the front
to a forward Brkt. that I didn't get.
As I remember,lower control arms are like 18-20" C to C
My question is,they must have been used in conjunction with the
lower control arm, so wouldn't that produce a bind situation?

Any one out there got a JR Catalog?
or remember these things.
Thanks,Joe

[PxTx]

Pics would help me here. Sounds like a pretty coll set of chunky set of bars.

[WorkinProgress]

Not trying to hijack your thread Joe, but thought another different pair might help give a timeline as to when they were made since mine are the same colors as yours.


Suppose to be for '70 1/2 and up Camaro's. Never found any info out on them. Must be pretty scarce.

- Warren

http://www.yenko.net/ubbthreads/pics/usergals/2014/10/full-12894-17648-jrbars1.jpg

http://www.yenko.net/ubbthreads/pics/usergals/2014/10/full-12894-17650-jrbars11.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2014/10/full-12894-17651-jrbars9.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2014/10/full-12894-17652-jrbars2.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2014/10/full-12894-17653-jrbars8.jpg

[Xplantdad]

THIS IS (http://www.wallaceracing.com/leafspringtraction.htm) the only thing that I could find that mentions them by name..

[brent396]

http://i411.photobucket.com/albums/pp198/SPIKEYZ0/Mobile%20Uploads/13705734915_29f26e338e_c.jpg

[PxTx]

Neat! Got an idea what when this ad was run?

[hiperf69]

Thanks guys,
Paul did you get pics I sent?
They look to be of the same era as the ones posted by Warren.
I looked up the address off the poster and it talks about the building being on the historical list
as an old automobile company but no info about the JR Mfg.
Cool reading thou.
Also back in the day, 1975ish I had a set of JR '62-'67 Chevy II BB fenderwell headers
and the 4" collector came down the back of the wheelwell then rolled back parallel
With the ground for about 8" or so. Only set of those I have ever seen.
Still would love to find a catalog
Thanks Again,Joe

[Mayhem]

I found this. Would it be the same company?
Not necessarily helpful, just history.

http://www.maddogheaders.net/

"Mark “Mad Dog” Delcamp spent his first nine years in the header industry working for JR Headers from 1973 up until their purchase by Hedman Hedders in 1982. Mad Dog remained with Hedman for seven additional years before deciding to open Mad Dog Headers in 1989. A small business atmosphere and low overhead ensures each header built by Mad Dog has over 40 years of quality manufacturing experience behind it. "

[PxTx]

Makes some sense. I've come up with the ad above being from 1973.

Joe, I didn't see any pics. I'll check spamp filters just in case.

[hiperf69]

Paul,sent them to your profile E-Mail.
If you don't find them here is my address.
E-Mail me an I will resend them thanks,Joe
[email protected]

[MECTransAm]

Does anybody have a set of the JR Traction Action Bars.. if so ,would you consider measuring the sizes of the letters of the attached decal 'JR action bars"..and anybody possibly have a set for a Second Gen F Body... for sale.??