Brand new Fenton RamRod 15 x 6 wheels set of 4

[chevyandpontiac]

Brand new set of 4 15 x 6 Fenton Ram Rod wheels, these are chevy bolt pattern 5 on 4 3/4.
I have 3 center caps and 19 lug nuts?? Over time I must have lost them. One rim looks like it got dinged on the back side, I did straighten out and you can not even really see it (On the back side). Please look at the pictures and ask any question. These still have the plastic on the front faces. We all know how hard it is getting to find these NOS parts.
New Price $1000.00 ship to the lower 48 states. http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36870-img_3073.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36871-img_3075.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36872-img_3077.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36873-img_3078.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36874-img_3079.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36875-img_3080.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36876-img_3081.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36877-img_3082.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36878-img_3083.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36879-img_3084.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36880-img_3087.jpg

[1967Z28]

Very cool wheels. Just curious, how come the one box says one-piece cast aluminum wheel but they look like two-piece wheels with a steel rim and an aluminum center section and face?

[chevyandpontiac]

The boxes all say four different things each flap is marked with different types of Fenton wheels

[Postsedan]

So Cool! <<GRAEMLIN_URL>>/drool.gif

Dan

[Charley Lillard]

Can you post a pic of the area that shows where the aluminum face meets up with the steel rim. I don't think I have seen rims like that or never paid attention.

[chevyandpontiac]

Sure thing I will post them tomorrow.

[Postsedan]

Hens Teeth....right here <<GRAEMLIN_URL>>/drool.gif

Dan

[chevyandpontiac]

Here you go, they drop in and then they weld them, http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36913-img_3090.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36915-img_3091.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36917-img_3092.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36918-img_3093.jpg

[1967Z28]

On a Cragar G/T two-piece wheel the steel rim is visible from the front side around the edge of the aluminum lip. It looks like on these Fentons that the aluminum lip covers the steel rim so it can't be seen from the front side. Is that correct?

[chevyandpontiac]

this is the reverse, the rim is under the aluminum face.
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-10756-36926-fenton.jpg

[chevyandpontiac]

Still have these.

New Price $1000.00 ship to the lower 48 states

[Stefano]

Very Kool!