My 68' chevelle baldwin motion L88 re-creation

[Dagodave]

Heres a couple of pics of my L88 re-creation bench seat column shift,heater delete,radio delete. Still have fact roll tach to install. http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50525-img_0318.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50526-img_0570.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50527-img_0105.jpg

[bigsixman]

Nice looking 68 Chevelle!

[wheelhop]

Love the cowl plenum air cleaner!

[Postsedan]

Nice Hot Rod

Dan

[markinnaples]

Pretty cool Chevelle. Any more pics?

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50571-img_1464.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50572-img_0016.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50573-img_0005.jpg

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50576-img_1795.jpg

[WILMASBOYL78]

<<GRAEMLIN_URL>>/beers.gif <<GRAEMLIN_URL>>/biggthumpup.gif <<GRAEMLIN_URL>>/worship.gif

[SS427]

Beautiful recreation!

[DW31S]

Looks real good!

[cook_dw]

<<GRAEMLIN_URL>>/biggthumpup.gif

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50792-img_1836.jpg

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50801-img_0589.jpg

[ORIGLS6]

Gonna paint the lower body Black?

[Dagodave]

Was thing about adding the black on the lower also considering a vinyl top...... any opinions?? http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50803-img_1791.jpg

[Dagodave]

Heres a crude example of what im doing, vinyl top, stinger hood and black on bottom

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/10/full-19429-50884-img_0033.jpg
Wegner built 496 with correct heads intake etc... 604 hp 598 ftlb on pump gas

[markinnaples]

Looks great either way. The black does add a little distinctiveness to it I think though.

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/11/full-19429-52097-img_2058.jpg
Vinyl top installed

[dykstra]

Beautiful Chevelle!!

[novadude]

What size wheels and tires (front and rear)? It's a good look!

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/11/full-19429-52179-img_1804.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/11/full-19429-52181-img_1819.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/11/full-19429-52183-img_1895.jpg
New grill and bezels added

[novadude]

Looks great. I think black below the moldings like on all SS396 cars would really set it off. I love the column shift, radio delete, etc.

What size wheels and tires are you running?

[realzed]

I had a '68 SS - Teal blue metallic - and the black rockers really add to the overall look especially if you ever go to a ET style or dark center magnum wheels with a bit of a body lift ('68 day 2 kind of look).
Vinyl top not so much in my opinion.. but front and rear bumper guards and blacked out headlight bezels and grill ala '69's and it really brings out the lines of those cars IMHO..
Love it!

[Dagodave]

I agree the car is getting the black on bottom will get tire sizes and post

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/11/full-19429-52299-img_2186.jpg
Just picked up stinger hood today! Thanks glasstek

[John]

..... That hood with a black stinger scoop will be awesome <<GRAEMLIN_URL>>/worship.gif

[cook_dw]

Car looks great. I would cut out the opening of the stinger too. <<GRAEMLIN_URL>>/biggthumpup.gif

Question. Do those valve cover spacers give you any issues? Leaks or wiper motor clearance? I was considering them on my next build and Im afraid the location of the Camaro w/m it will come into contact or I will have to remove the w/m every time I need to access the rockers.

[Dagodave]

Darrrell, i have had zero issues with the valve cover spacers there made local and machined out of billet aluminum they claim you can just seal them to the cyl hd with no gasket but i chose to use one anyway and the are made in several different thickness. No plans to open scoop with the cowl plenum air cleaner gettin fresh air from cowl. Thanks for the input!

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/11/full-19429-52491-img_2197.jpg
Fitting stinger hood always fun!!

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/11/full-19429-52675-img_2070.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/11/full-19429-52676-img_2071.jpg
New 565 short block just completed by wegners combo will be topped off with my winters heads and intake, dyno numbers coming soon!

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/12/full-19429-53809-img_2338.jpg
Just got my tach and guages back looks awesome,not looking forward to removing dash again......ugh! If anyone has a good wiring diagram for the guage cluster let me know thanks!

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/12/full-19429-54284-img_2443.jpg
Out with the old and getting ready for the new!

[markinnaples]

Looks good, keep us updated.

[W117Monte]

this thing is beyond cool. nice job. i bet it is a blast to drive and can lay rubber for blocks.

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/12/full-19429-54432-img_2463.jpg
Received new wire harness today custom made heater delete,radio delete and fac roll tach and clock!

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/12/full-19429-54727-img_2495.jpg
Installed dash today with new harness starting to look like a car today

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2016/12/full-19429-54844-img_2525.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/12/full-19429-54846-img_2524.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2016/12/full-19429-54847-img_2526.jpg
Just scored some 077's from a guy who bought them new! Along with orig reciept and there perfect

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-55537-img_2613.jpg
Restored vent windows arrived today they look great!

[whitetop]

Looks great but needs periodcorrect aftermarket mags

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-55551-img_2643.jpg
Off to the body shop for stinger hood and lower body paint

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-56270-img_2785.jpg
I don't recommend surprise visits to the body shop! Its a reality check Lol

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-56806-img_2906.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-56807-img_2902.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-56808-img_2899.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-56809-img_2898.jpg
Paint is finished and wet sanded,ready for buffing it's coming together

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-57187-img_2929.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-19429-57188-img_2930.jpg
565 is finally getting close to completion!

[markinnaples]

Can't wait to see this done.

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-57254-img_2956.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-57255-img_2963.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-57256-img_2970.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-57257-img_2974.jpg
Finally back from paint! Now the task of reassembly......no scratches!

[WILMASBOYL78]

<<GRAEMLIN_URL>>/worship.gif <<GRAEMLIN_URL>>/worship.gif <<GRAEMLIN_URL>>/worship.gif <<GRAEMLIN_URL>>/flag.gif

[SuperNovaSS]

That looks awesome!

[day2killa]

great rebuild

[markinnaples]

Agreed, that looks amazing. Are you going to do some Day 2 wheels or keep the poverty caps and steelies?

[Dave Rifkin]

Are you going to put the insert in the scoop or leave it as is? Looks great by the way.

[Dagodave]

Well....... i bought a orig insert in the gm box and it doesn't fit! Dam and im not reworking the hood so i was thinking of doing a satin black in the insert. Any other ideas??

[earntaz]

Satin black would be OK or find someone that is good with an airbrush and duplicate the chrome insert with paint. TAZ

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-57343-img_2979.jpg
Update on motor build,looks complete and going on the dyno hopefully tomorrow. Numbers coming soon

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-57732-img_3022.png
Well here's the dyno info! The torque is insane..... should be a handful to drive

[mockingbird812]

Impressive!

[69VN]

WOW!!! Beautiful transformation! <<GRAEMLIN_URL>>/headbang.gif <<GRAEMLIN_URL>>/headbang.gif <<GRAEMLIN_URL>>/headbang.gif

Sal

[SuperNovaSS]

Sounds like it has the potential to surprise some stoplight bandits. Nice work.


Jason

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-57766-img_3018.jpg
Nice side shot of car with lower body paint, think I'm going to keep the poverty cap look( wolf in sheeps clothing)

[SuperNovaSS]

Awesome car! I've never seen a sheep with a stinger hood. Just sayin.


Jason

[Dagodave]

It's a sheep with a BAAAAADDD attitude

[markinnaples]

I've always been a big '68 Chevelle fan since I owned one BITD. I love the uniqueness of them with the offset grill and rolling tach. Yours look killer, nice job.

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-58067-img_3041.jpg
No your not seeing double...... both motors back from Wegners 565cu on left 496cu on right. 496 made 598 hp and 600ft on pump gas considering selling it if there is any interest can give details

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-58257-img_3095.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-58258-img_3102.jpg
Motor installed getting close now

[mockingbird812]

Yowza - looking GOOD!!

[Dagodave]

Thanks! Sucks trying not to scratch anything!

[Dagodave]

http://www.yenko.net/ubbthreads/pics/usergals/2017/02/full-19429-58400-img_3126.jpg
Getting close!

[454_Malibu]

This Car is @#%#ing Awesome,,, <<GRAEMLIN_URL>>/beers.gif

[Dagodave]

It's been awhile but finally got back to finishing up what I started, pulled the 12 bolt and installed a new Yukon center and a 3.90 gear set along with rear discs to help stop

[L78M22Rag]

Ha! Only 598 hp and 600ft.... I can see why you had to upsize to the 565. What'd it make?

[Dagodave]

The 565 made 672 hp 700 ft on pump gas..... had to ad a vacuume pump to keep my power brakes

[Dagodave]

Short vid of it running
https://youtu.be/INZPd8pbqN0

[markinnaples]

Tried to watch the video, but this came up:
"This video is no longer available because the YouTube account associated with this video has been terminated."

[Dagodave]

Sorry cant figure out what happened,dam interweb

[NorCam]

The 565 made 672 hp 700 ft on pump gas..... had to ad a vacuume pump to keep my power brakes

Thats decent. I built a 565 Dart a couple years ago and it made 713hp & 732tq on 10:5 compression with a Bullet solid roller in it. It was a mitt-full to hang on to when you mashed the go fast pedal.

Nice work on the Chevelle. :)

[Dagodave]

https://youtu.be/INZPd8pbqN0
Try this it worked for me

[Dagodave]

Oh... its a handfull alright with 700ft at 3500 rpm on bf goodrich redlines

[markinnaples]

Yes, that Youtube link worked. Car looks and sounds great.

[Dagodave]

Just received my nitto drag radials from diamondback they look great! Stay tuned for pics on the car

[Tarrytown SS427s]

What size are the drag radials and what size wheels are ou putting them on?

[Dagodave]

They are 275/60/15's on a 8 or 9" rim I don't recall. When i mount them i will confirm rim size

[L78M22Rag]

Please measure the backspace on the rims while you're at it.

Looking good!

[Turbo70Camaro]

Wow what a great job with your car and dig the redline drag radials:naughty:, also I like the valve cover spacer that doesnt show the gasket I run same ones with factory covers..............

[Dagodave]

NOSTALGIC AUTO BODY is finishing up on some serious detail work, they are amazing!

[Sean]

Please measure the backspace on the rims while you're at it.

Looking good!

You can do a 15x10 with a 5.5 back space and use 295 tire or a 15x8 with 4-4.25 b.s.

[Dagodave]

Just picked up my 400 trans from FINISHLINE today not only does it look good it will handle the 700 ftlb of torque!

[Xplantdad]

Coming together nicely!!:Can-I-Have-It::biggthumpup:

[Dagodave]

Like to say a BIG THANKS to all the guys at NOSTALGIC AUTO BODY today for all there help! A

[cook_dw]

Car looks great. I would cut out the opening of the stinger too. :biggthumpup:

No plans to open scoop with the cowl plenum air cleaner gettin fresh air from cowl. Thanks for the input!





Glad to see you came around. :beers: It looks great!

[Dagodave]

LOL look closer insert is only painted

[cook_dw]

Ahhhh dang... :bs: :thumbsdown: lol. I suck.. :haha:

[Dagodave]

Here are a few pics of the finished product THANKS Nostalgic auto body!

[Turbo70Camaro]

badasssssssssss

[markinnaples]

That thing is killer looking congrats.

[Ryan1969Chevelle]

Dan Vasic giving hood opening and closing lessons?

"So this here is open"

Ryan

[Dagodave]

Received a factory rebuilt tilt column from chuck at PARTS FINDER looks amazing!

[wheelhop]

Looking forward to seeing this car up close tomorrow at Lombard Cruise! Last one of the season.

[Dagodave]

Lombard was way cool last night, and we braved the rain for a great night!

[Dagodave]

A shot of Jim's 69' chevelle

[Postsedan]

Great Picture.....Nice plate Jim :D

Dave, glad you got to experience Lombard.....there is one more Rolling Meadows (the last one) this coming Friday :D

Dan

[Rixls6]

The Stinger twins. Nice

[Ryan1969Chevelle]

It took a while but the Stinger on a 68/69 Chevelle has won me over:-)

Ryan

[wheelhop]

Had a blast hanging out with Dave and John P. (SSL78) on Saturday night. It rained a little but we had good spots under roof of bank.
These two cars could be "Irish twins" since they are less than 11 months apart :-)

[Dagodave]

Neat sign I just picked up will look good hanging over car!

[wheelhop]

That is way cool !!

[Dagodave]

Sneak peek had my buddy out last night who photographs cars for a living and took some way cool pics will post more as he works his magic

[markinnaples]

Wow, can't wait to see more pics, that one looks great.

[wheelhop]

Make a great christmas card, you want my address?

[Dagodave]

Lol, you might be on to something!

[Dagodave]

Bad ass interior shot

[Dagodave]

Neat shot of the motor

[Dagodave]

Another shot

[Dagodave]

Neat closeup

[Dagodave]

Misc interior pic

[Dagodave]

Nice 3/4 view, space was tight couldn’t get real good exterior pics

[Tenney]

Sharp!

[Xplantdad]

Looks great!

[L78M22Rag]

Lookin' gooood!

I see the Chevelle matches your boat.... imagine the Chevelle with a hitch on it and headed out to the lake!

[Dagodave]

Few more pics

[454_Malibu]

Swweet Ride, Great Pics

[Retired Navy GMC]

Love it!!! Great pics!!! Want to put it in my garage next to a kick ass Impala SS?:beers:

[Dagodave]

Everything is for SALE!!

[dykstra]

Bumping this old thread because this car is awesome!!