FLOCKING FELT

[ALLZS]

ON A 69 CAMARO WAS THE GLOVE BOX LINNER & CONSOL INNER COMPARTMENT AND THE INSIDE OF THE CONSOL LID DONE IN FELT THANKS

[cook_dw]

http://www.camaros.net/forums/23-interiors/155891-flocking-your-console-glove-box-dale8346.html

[Mr70]

I did my own about 20 years ago with a kit from a company here in Il. called DONJER
Came out great.


Oops,I see that is referenced..Great stuff!

[parkbrau]

i did this using the TC link above...about 5 years ago. It worked well.

[ALLZS]

I DID SEE DIFFERANT KIT TO DO THIS JUST NEEDING TO KNOW WHAT DOES OR DOES NOT GET THE FELT FOLCKING ? THANKS FOR ALL THE REPLYS

[169indy]

I suggest a Double Dose of Flocking.
1st on the interior of the console base and a 2nd on the back side or interior of the lid.
I used the same kit (I chose to mask Hinge area, might not be how the factory did it but it is not seen)
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-304-55509-flocking.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-304-55510-flocking_2.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-304-55511-flocking_3.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-304-55512-flocking_4.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-304-55513-flocking_45.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-304-55514-flocking_46.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-304-55515-flocking_47.jpg
http://www.yenko.net/ubbthreads/pics/usergals/2017/01/full-304-55516-flocking_5.jpg
I think 67-68 glove boxes also received similar treatments.

Note * No skill required (See instructions)-
JIM