Concourse restored Hardware sets

[Enoch]

Many many sets of restored original assembly line Concourse Hardware 4 Camaros Chevelles Nova's Impalas GTOs Corvettes. Just going to list a few I have way too many to list and take pictures of. So if you don't see something you want just send me a message.

First up is an extremely hard to find set of big block intake manifold bolts they are recessed head with a built-in flange and a head marking. They don't reproduce these these were removed from a 69. $250 4 a set of 14. If you want the additional two engine lift bracket bolts for the front bracket and the rear lift bracket bolt it will be an additional $40. All excellent restored ready to install. Prices include shipping to the lower 48 if paid with PayPal friends and family.

[Enoch]

Next up a set of ewf head marking bellhousing to engine block mounting bolts. Again extremely rare and not reproduced. Excellent condition replated ready to install $90 shipt to the lower 48 if paid with friends and family PayPal

[Enoch]

Set of 14 TR head marking valve cover bolts. Replated excellent condition ready to install $250.

[Enoch]

69 Factory Hurst shifter mounting hardware for big and small block. Two sets excellent restored condition. $100 asset shipped to the lower 48.

[Enoch]

69 through 72 big block alternator mounting hardware 4 log style water pump. $80 ship to the lower 48

[Enoch]

One pair of horn bolts with serrated washers. $40 shipped to the lower 48

[Enoch]

660 thermostat housing bolts $40 ship to the lower 48

[Enoch]

65-72 corvette body mount hardware.
4 RSC body mount bolts
2 RBW radiator support Mount bolts
4 W stamps oversized thick body mount washers
2 special size radiator support Mount washers

6 heavy duty Square side lock washers

200.00 for the set shipped to the lower 48

[wrench]

The bolt set in pic #9 in your ad is for a small block and will work on a big block but to be correct all 3 bolts that mount the plate to the tail housing on a big block are hex head. Just trying to help. Thanks

[Enoch]

Transmission to bellhousing mounting bolts a head marking stripped and replated excellent condition. They don't reproduce these. $80 ship to the lower 48 if paid with PayPal friends and family.

[Enoch]

68 up coil mounting bolts one pair with three dots one pair with GL. $30 a pair ship to the lower 48 if paid with PayPal friends and family.

[Enoch]

69 up Camaro Chevelle Nova front caliper brake line banjo bolts. These are the originals they have a dimple on the middle of the top. Excellent restored condition. $40 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

Voltage regulator, washer bottle mounting bracket, Rally Sport washer bottle mounting bolts. Recessed flanged head with a raised dimple. Flat end. They do not reproduce these. $45 for a set of three ship to the lower 48 if paid with PayPal friends and family

[Enoch]

Camaro Chevelle Nova and Paula GTO 442 C 48 heater delete mounting plate bolts. D head marking excellent condition very hard to find. Complete set of 9. $60 a set shipped to the lower 48 if paid with PayPal friends and family. Three sets available.

[Enoch]

67 to 69 Camaro Firebird rear axle bumper bracket mounting bolts. He had marking. Excellent restored condition. Very nice they do not reproduce this head marking on these bolts. $50 a set shipped to the lower 48 if paid with PayPal friends and family. Two sets available.

[Enoch]

Camaro Nova small and big block upper fan shroud mounting hardware. Two rbw head marking bolts and one small font GL head marking Bolt. Excellent unrestored condition. Also J clip for GL head marking both included. $50 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

fan to fan clutch mounting bolts a head marking. Excellent restored condition they don't reproduce these. $40 shipped to the lower 48 if paid with PayPal friends and family. three sets available. Most aftermarket kits include studs and nuts. These are assembly line pieces.

[Enoch]

Camaro Chevelle Nova Impala GTO Fender to radiator support top mounting bolts. These are the two bolts you see when you look down inside the Hood by the hood bumper that mount the fenders to the radiator support. The assembly manual calls for this style with the captured flat washer and flat tip. However many times the assembly line workers grabbed the bolts with the flanged head and pointed tip and use them in this application. I have sets of both for sale. The bolts with the captured flat washers have IM for their head marking. The bolts with the flange Ted and pointed tip have rbw for their head marking period for bolts purse sets $43 per set shipped to the lower 48 if paid with PayPal friends and family. all restored in excellent condition. 4 sets of each pad marking available.

[Canuck]

Nice work
Are you using a tumbler or vapor blasting?

Paul

[Enoch]

Paul, I do a little bit of everything depending on what mood I'm in that day. Sometimes I'll wire wheel, sometimes I'll dip it in acid and sometimes I will glass Beat It.

[Enoch]

Medium font TR transmission to bellhousing mounting bolts. Excellent restored condition. $60 ship to the lower 48 if paid with PayPal friends and family.

[Enoch]

Original restored Camaro horn bolts. One set with C head marking and the other set with rbw. $40 a set shipped to the lower 48 if paid with PayPal friends and family. One set of the rbw available four sets of C available.

[Enoch]

68 through 72 small-block intake manifold bolts. 12 CH head marking bolts and 2 a head marking with a built-in flange lift bracket mounting bolts. SOLD $100 shipped to the lower 48 if paid with PayPal friends and family. Excellent perfect restored condition. SOLD

[Enoch]

68 to 71 small block intake manifold bolts restored. M in a circle head marking for 12 of them non shouldered and to WB shouldered bolts for the engine lift hooks. Excellent restored condition. SOLD $100 for the set ship to the lower 48 if paid with PayPal friends and family. SOLD

[Enoch]

What happened to a 10 and a half inch clutch low mass flywheel starter bolts. See head marking. This is correct for early Big Blocks Z28 ZL1 L88 and all small blocks up until 66. Also correct for ZR 1 Corvettes. Three sets of C head marking available all excellent restored condition. $40 per set shipped to the lower 48. They do not reproduce these with correct head markings.

[Enoch]

67 through 68 Z28 valve cover mounting hardware. Original s stamped hold down tabs and NAT head marking bolts. Completely stripped and replated. Perfect Concours restored condition. $100 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

Restored big block valve cover bolts. Rbw head marking. Extremely nice set of 14. $125 shipped to the lower 48 if paid with PayPal friends and family. Two sets available.

[Enoch]

Big block valve cover bolts. CH head marking. Excellent restored condition. $125 set of 14 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

NOS lower control arm to frame mounting bolts. For Camaro Chevelle Nova and Impala. CH head marking with NOS lock nuts. 5 sets available. $45 a set shipped to the lower 48 if paid with PayPal friends and family

[Enoch]

67 68 Z28 and all other cars with cast iron curved neck thermostat housing mounting bolts. Long bolt is CP head marking short bolt is SBC head marking. 3 sets available $35 is set shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

Fan clutch to water pump Hub mounting bolts. Original P grade 8 head marking. Excellent restored condition $55 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

Small block spark plug heat shield mounting bolts complete sets of 4. J head marking, E head marking, Sems head marking and anchor head marking. Each kit $35 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

1960 through 1968 small block rbw head marking crankshaft pulley mounting bolts. Excellent restored condition. $35 a set shipped to the lower 48. If paid with PayPal friends and family

[Enoch]

Flathead F steering coupler mounting bolt. Very hard to find not being reproduced in this configuration. $30 shipped to the lower 48 if paid with PayPal friends and family

[Enoch]

6 M head marking bellhousing to block mounting bolts and intake mounting bolts. Excellent restored condition. Four of them have plane and head marking four of them have the same M font with two circles in the background. $60 the set shipped to the lower 48 if paid with PayPal friends and family. They do not reproduce this with the correct font.

[Enoch]

Camaro Chevelle Nova Firebird original battery tray mounting bolts. Flying F head marking on the bolts with the large washer, 23 head marking on the bolts with the flange head. $60 is a set shipped to the lower 48. If paid with PayPal friends and family. Three sets available

[Enoch]

Camaro Chevelle Nova Firebird battery tray mounting bolts. Flying F head marking on bolt with a large washer and e head marking on the bolt with a flange head. $60 to set ship to the lower 48 if paid with PayPal friends and family. Three sets available.

[Enoch]

Chevelle GTO 442 brake and fuel line bolts. Three different head markings. GL, 23 and three dots. $60 for the complete set shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

67 through 69 Camaro front spoiler mounting hardware set restored. Included are for anchorhead marking bolts that attach the spoiler to the valence. For nuts comma 2 rbw and marking bolts and for anchor over T head marking bolts that attach the rods to the fender extension and Valance. Excellent complete set. $80 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

Motor mount to frame stand bolts 4 All GM cars up to Mid 69. Three different head markings available.
A
UR
(F)
$35 a pair ship to the lower 48 if paid with PayPal friends and family. Multiple sets of each available

[Enoch]

Cleaning out the inventory open to offers on all sets. Thanks SYC

[my70454ss]

Hey Rich,

Are the Concourse Restored Motor Mount to Frame Mount Bolts
with the A stamp still available. If so I’ll take them.

Thanks

Rodger

[Enoch]

Rodger yes they are. Thanks. Rich

[my70454ss]

Rich PM sent

Thanks
Rodger

[Enoch]

Small Block intake manifold bolts. Restored, 14 with RSC head marking enough to do from 60 through 72. Also included two recessed flanged a head marking engine lift bracket bolts for 68 through 71. They do not reproduce these bolts in these head markings. They are in excellent condition. $100 shipped to the lower 48 if paid with PayPal friends and family. Open to offers.

[Mulsanne Blue]

68 to 71 small block intake manifold bolts restored. M in a circle head marking for 12 of them non shouldered and to WB shouldered bolts for the engine lift hooks. Excellent restored condition. SOLD $100 for the set ship to the lower 48 if paid with PayPal friends and family. SOLD

Paid for these on 1/8, have not received. Sent PM on delivery status. Please respond. Thanks

[Enoch]

Will do !!