WTB - 68 Camaro TB9 NMW Tow Tabs and Hitch Pinsc/w Hitch Pins

[68 DANA]

Searching for a set of TB9 NMW tow tabs and a set of original pins and hitch pins.

Thanks!

[68 DANA]

Still searching...I am sure they will eventually surface.

Thanks!

[chevyman0429]

https://www.yenko.net/forum/showthread.php?t=150533

[68 DANA]

Yes, I did see the link earlier, however the seller is not recommending using them for towing. Not sure why...perhaps because of the weld or the type of welding rod used. I have asked for clarification from the seller.

Thanks for the lead though.....

[scuncio]

I would not tow with any tow tabs, NMW or otherwise...too dangerous IMO on today's roads.

[68 DANA]

I could not agree more. I would like to tow the car back to the starting line after each lap down the track....more of a nostalgic thing.

I would not have an issue using a pair of reproduction tow tabs for such a thing if they were correctly made/welded.

[scuncio]

Gotcha.

I used a clamp-on tow bar, once, to tow my old GS convertible out of the original owner's backyard and ~50 miles back to my college. Way scary, even for an 18 year old, which is saying something.

[68 DANA]

I too did a similar thing back in the day. The only thing for sure was to clamp on, hold on and hope for the best. Now a days...car trailer all the way!

[chevyandpontiac]

Can not beat this deal,

https://www.ebay.com/itm/NMW-1968-camaro-tow-tabs/202420958326?hash=item2f213ab476:g:9k4AAOSwplBbf4p p

[scuncio]

That's what I said too. For what you're using it for I would just get these. These days, with litigation as it is, no one is going to validate that a set of tabs would be OK for towing. Doesn't mean they are junk, just one of those statements you need to include to keep someone from doing something irresponsible.

[Fast67VelleN2O]

.

[GotGrunt]

Gotcha.

I used a clamp-on tow bar, once, to tow my old GS convertible out of the original owner's backyard and ~50 miles back to my college. Way scary, even for an 18 year old, which is saying something.

I recently pulled an old Chevelle race car out of a yard and flat towed it to my house. It had tow tabs on it and I had the tow bar handy, what could go wrong :D It was even more sketchy since the car had no motor in it and skinnies up front, didn’t want to track properly. It was definitely an eye opening experience.

[68 DANA]

Still searching for a set of the TB9 NMW tow tabs and corresponding Pins (NMW Part #1011; qty 2) and hitch pin clips (NMW Part #1022; qty 2).

Thanks !

[Mr70]

Repros have gone up.
https://www.ebay.com/itm/NMW-Tow-Tabs-New-Repo-Camaro-1967-1968-COPO-ZL1-mint-tow-bar-vintage-old-school/283338242909?hash=item41f8467b5d:g:0EsAAOSw0YlcO90 7:rk:2:pf:1&vxp=mtr&frcectupt=true

[68 DANA]

Repros have gone up.
https://www.ebay.com/itm/NMW-Tow-Tabs-New-Repo-Camaro-1967-1968-COPO-ZL1-mint-tow-bar-vintage-old-school/283338242909?hash=item41f8467b5d:g:0EsAAOSw0YlcO90 7:rk:2:pf:1&vxp=mtr&frcectupt=true



I appreciate the lead and will check them out...not sure if they are originals or reproductions for sure. Waiting for a response....

[68 DANA]

Still searching for an original set of TB9 NMW tow tabs and corresponding Pins (NMW Part #1011; qty 2) and hitch pin clips (NMW Part #1022; qty 2)

Thanks!

[68 DANA]

Located a set of TB9 NMW tow tabs. Would like to located a second set and still actively searching for a set of the corresponding Pins (NMW Part #1011; qty 2) and hitch pin clips (NMW Part #1022; qty 2).

Thanks!

[GotGrunt]

Located a set of TB9 NMW tow tabs. Would like to located a second set and still actively searching for a set of the corresponding Pins (NMW Part #1011; qty 2) and hitch pin clips (NMW Part #1022; qty 2).

Thanks!

Do the pins & clips have to be NOS?

[68 DANA]

Do the pins & clips have to be NOS?


No....a good used set of pins and clips would do.

[GotGrunt]

No....a good used set of pins and clips would do.

PM sent.

[Mr70]

Type in the name Gary Kaye on the left side search box of this Facebook page,he is selling some.
https://www.facebook.com/groups/nmwnmw/

[68 DANA]

Thanks for the lead......but unfortunately I am still searching for an excellent set with the BIS insignia.