1966 ss-396 impala sport coupe

[Big Block Bill]

I am selling my St Louis Built 1966 SS-396 Impala Sport Coupe project along with the Mother Load of NOS parts I have collected over the last 15 years. Originally a white car with black buckets, Console, A/C, 396 / 325 Holley Carb, TH-400 P/S, P/B, 2-Spoke Steering Wheel, power trunk release, 3:31 open 12 bolt rear end.

The car now has a 1978 GM / Chevrolet LS-6 Crate Engine, LS-6 Corvette carburetor with HEI, Hooker headers, and a large Hydraulic Camshaft (Approximately 475 Horse Power)

All suspension, ball joints, springs, shocks, and alignment have been replaced.

I believe the transmission and differential are original to the car. It is now painted Marina Blue (poorly)

This Car starts runs, drives is licensed and insured.

It runs like a scalded Dog!

Needs: floors, quarters and trunk pan replaced. Listed below are the parts included.

GROUP# PART# DESCRIPTION QUANITY
1.1266 6869746 UPPER GRILL 1
3869746 LOWER GRILL 2
2.681/2 5958921/22 TAIL LIGHT BEZEL – CAPRICE L&R 2
5958919/20 TAIL LIGHT BEZEL – IMPALA L&R 2
5957983/4 TAIL LIGHT LENSE – CAPRICE L&R 2
TRIM PARTS A-2550 TAIL LIGHT LENSE – IMPALA LH 1
A-2550A TAIL LIGHT LENSE - IMPALA RH 1

2.720 3869747 LEFT HEADLIGHT BEZEL 1
3869748 RIGHT HEADLAMP BEZEL 1
7.828 986625 FRONT BUMPER GUARD 2
3872141/2 FRONT GUARD 5
7.833 3890157 LOWER GRILL MOLDING 1
8.015 3886309 HOOD CROWN / CENTER MOLDING 1
8.130 3886309 LEFT FENDER 1
3886310 RIGHT FENDER 1
8.132 3904043 MOLDING 1
3904044 MOLDING 1
3886374 FENDER SIDE MOLDING 2
3886221 EYEBROW MOLDING RIGHT FRONT 1
3886222 HEADLIGHT OPENING MOLDING 1
3886224 HEADLIGHT EXTENSION RIGHT FRONT 1
3886263 1
3886223 HEADLIGHT OPENING MOLDING 1
8.147 3878607 427 CROSS FLAG EMBLEM 2
3867735 SUPER SPORT PLATE 2
3840318 EMBLEM 1
3862208 EMBLEM 2
3862173 LETTER KIT 1
8.304 3862227 BODY SILL / ROCKER MOLDING 2
9.273 987302 REAR STEREO SPEAKER BOX 2
10.093 4467604 WINDSHIELD UPPER MOLDING 1
10.185 986474 OUTSIDE REAR VIEW MIRROR 1
3848937 OUTSIDE REAR VIEW MIRROR 1
10.307 3850212 COWL VENT PANEL 1
10.351 7587233 LEFT DOOR SHELL – COMPLETE 1
10.527 9702886/7 LEFT AND RIGHT OUTSIDE DOOR HANDLE 2
10.529 9704697 BUTTON 1
12.075 4484690 RIGHT SCALP / ROOFRAIL MOLDING 1
12.112 4227273 DOOR MOLDING 2
4467228 WINDSHIEL LOWER REVEAL MOLDING 2
12.116 4229496 EMBLEM 1

GROUP# PART# DESCRIPTION QUANITY
12.112 4467229 WINDSHIEL LOWER REVEAL MOLDING 1
12.116 4227202 ¼ PANEL SIDE MOLDING 2
4227043 ¼ PANEL END MOLDING - LEFT SIDE 1
12.182 4227026 TRUNK - LOWER MOLDING 1
4227047 TRUNK EMBLEM 1
15.024 7692867 REAR PACKAGE SHELF – BLACK IN COLOR 1
*NOTE: ALL PARTS ARE IN MINT CONDITION IN ORIGINAL PACKAGING AND INCLUDE ALL HARDWARE.

OTHER NOS PARTS
(2) 3979741 WIPER BLADES IN GM BOXES
(2) COMPLETE SETS (8 TOTAL) OF GM WHEEL OPENING MOLDINGS IN ORIGINAL PACKAGING

USED PARTS
ORIGINAL COMPLETE 2 SPOKE STEERING WHEEL WITH BLACK HUB / BUTTON/ PLUNGER / HARDWARE
(4) NICE SUPER SPORT HUB CAPS
AM/FM RADIO
MINT PAIR OF 1966 - 396 EXHAUST MANIFOLDS
POWER TRUNK VACUUM ACTUATOR SWITCH / BRACKET
BOTH FRONT AND REAR RE-CHROMED BUMPERS COMPLETE (NEVER INSTALLED / IN PACKAGING FROM CHROMER)


$12,500.00 Firm

Thanks for looking, Bill

[luzl78]

that is an awesome price with all those parts. i would say too low you did all the hard work and scrounged the nos parts. it won't last long

[Big Block Bill]

That's what I thought, A LOT of "Stuff" for $14,500.00 Isn't anyone into "Big Cars"? I will listen to a real offer (Or Trade, I need a winter SUV for my oldest Son)

Bill

[mssl72]

I like big cars! Not having room is a problem. I'll pass the word amongst my big car friends.

[Big Block Bill]

Mark,

I would appreciate you doing that, it would be a shame after all these years to "Part" this car out. It was a Loaded car in its day for not being a Caprice, and it would be a shame not seeing this project get completed correctly with all the NOS parts I have collected.

I do have the original numbers matching short block that goes with the car, but it needs 1 sleeve.

Thanks,

Bill

[Big Block Bill]

Includes numbers matching 396 short block (Needs 1 Sleeve)

Bill

[Big Block Bill]

Any offers or trades will be seriously considered. I need to move this Mother Load of parts and this Car before Winter sets in here in Chicago Illinois. Thanks for looking.

Bill

[Stefano]

Bill you always have Kool stuff! Damn Global warming is affecting Chicago Land today.

[Big Block Bill]

Currently available with a price reduction of $13,500.00 for complete car and all parts listed including a pair of complete, rust free, used doors

[daverd]

Global whining tired of listening to the fools
They want all electric cars YIKES!!!

[Big Block Bill]

New price reduction to $12,500.00 for complete car and all parts listed including a pair of complete, rust free, used doors. Must sell

[Big Block Bill]

This project is looking for a new home and I am open to all offers. It would be shame to "Part Out" this car and all the NOS parts it took me 16 years to acquire. Please spread the word and Thanks for looking. Bill

[Caseys69]

I cant believe this hasnt sold

[Big Block Bill]

New price $12,000.00 for EVERYTHING I have, and I have a LOT of Stuff for a 1966 Impala. Bill

[Big Block Bill]

Another price reduction to $11,500.00 for EVERYTHING I have, and I have a LOT of Stuff for a 1966 Impala. Anybody? Bill

[MYSTERYCHEVELLE]

That’s a lot of bumps LOL

[Big Block Bill]

The last call before it gets "Parted Out": $8,500/00 for the whole Package, Car and all the Parts!

Thank You Yenko.net for the opportunity!

Bill

[Big Block Bill]

I need to sell this Package ASAP. New price: $8,500.00

Bill

[John]

…

… Bill, That would be a great car to restore and you have a great price on it with all the parts.

… If you are on Facebook, you may want to join this Group on Facebook
… All Chevy Muscle Swap

https://www.facebook.com/groups/AllChevyMuscle

… Good Luck with your sale :flag:

...

[Big Block Bill]

Thanks, John

The Impala and NOS parts have been sold. Thank You Yenko.net for the listing.

Bill