Small Items - Floor Plugs and Pinion Snubber

[Edgemontvillage]

Located - thanks SYC!

Pinion Snubber - looking for a nice original, push-in wedge style snubber:
https://farm5.staticflickr.com/4803/46259724664_5afcab3594_c.jpg (https://flic.kr/p/2dtPbtJ)[/url] (https://flic.kr/p/2dtPbtJ)

https://farm8.staticflickr.com/7841/32042884347_f439049af2_z.jpg (https://flic.kr/p/QPwaae) (https://flic.kr/p/QPwaae)


Floor Drain Plugs - looking for 4 early to mid 1969 dated plugs in restorable condition:
https://farm8.staticflickr.com/7906/46932077812_ca188293c9.jpg (https://flic.kr/p/2eveaDo) [url=https://www.flickr.com/photos/156633854@N02/] (https://flic.kr/p/2eveaDo)

[lbnaz]

I have two plugs I pulled out of a 69 AZ carcus that are in good shape but I do not see any dates on them. Never knew they were dated. Larry

[Edgemontvillage]

Here is an example of what the date code stamps look like:
https://farm8.staticflickr.com/7861/40021395473_b808cd2a43.jpg (https://flic.kr/p/23Yy7xT)[/url] [url=https://www.flickr.com/photos/156633854@N02/] (https://flic.kr/p/23Yy7xT)

[XXXGoldL34M20]

I have one Dated H46 8 which I think is the 48th week of 1968?
Is that close enough for a 69' ?

[Edgemontvillage]

I have one Dated H46 8 which I think is the 48th week of 1968?
Is that close enough for a 69' ?

Yes that date would work however I need 4 - do you have more?

Lloyd

[XXXGoldL34M20]

Yes that date would work however I need 4 - do you have more?

Lloyd
Just have that one

[Edgemontvillage]

Just have that one

Thanks for responding to the post however I really need 4 that are matched or in a close date range.

[XXXGoldL34M20]

Thanks for responding to the post however I really need 4 that are matched or in a close date range.
FYI
Going to be extremely tough to land 4 from one person,
I can tell you the floor plugs I pulled from the same car this plug came from only the one plug was dated while the other 3 were non dated.
My 70 Chevelle SS has never been restored and they have a mixed lot of dated and non dated plugs still never removed from the car.

[Edgemontvillage]

FYI
Going to be extremely tough to land 4 from one person,
I can tell you the floor plugs I pulled from the same car this plug came from only the one plug was dated while the other 3 were non dated.
My 70 Chevelle SS has never been restored and they have a mixed lot of dated and non dated plugs still never removed from the car.

You could be right however with tens of thousands of these plugs produced (6 per car for every F body and interchangables) during the period I have to believe they are out there.

[enio45]

lloyd - are they galvanized plated?

IF so , any thoughts how u are going to do that?

[Edgemontvillage]

Eddie, I’m hoping the right set will clean up with vapor blasting.

[Edgemontvillage]

Located, thanks SYC!

https://farm8.staticflickr.com/7894/33462884548_edcfdde4fb_z.jpg (https://flic.kr/p/SZ12Kj)[/url] [url=https://www.flickr.com/photos/156633854@N02/] (https://flic.kr/p/SZ12Kj)

[ZLP955]

Never noticed the 4 dimples before!