69 Camaro Instrument Dash Housing Wanted

[NorCam]

Looking for a nice clean 69 dash housing. Prefer center hole cut for clock/fuel gauges. Must have no added holes, no cuts for aftermarket radio, or broken tabs etc.

Let me know if you have a clean housing. Shipping to Montana 59484

Thanks...Graeme

[ALLZS]

Tach or no tach

[bbbentley]

Got a nice one Graeme. But you say no extra holes and this was a rear defrost dash. But a wood grain plate would cover that up. Just FYI

[NorCam]

Might work Bentley?

I'm trying to find a suitable replacement for this one from my Z/28. It's a tach housing that came from the Z/28 stocker and had a radio delete plate on it. I removed that today to start restoring it only to discover it had 5 screw holes drilled under the radio delete plate as seen here. Don't want to use this one now. :thumbsdown:

https://i.ibb.co/jL9DR0W/IMG-3536.jpg

I'd like to find a clean replacement with good radio holes and plan to reuse the speedo, tach, and clock from it. Just need a clean tach housing with center hole cut. As long as it's got all the mounting holes and isn't cracked or broken I could add the rosewood plate to cover rear defrost as suggested. It's for a restored car so hopefully something really clean that doesn't need a ton of work to get it up to snuff.

PM for email address or text # for pics if you have something. Thanks

[ALLZS]

I have a original restored one i would have to get it out and look at it

[NorCam]

I have a original restored one i would have to get it out and look at it

That'd be cool. I'll PM my email address again. Thanks

[SuperNovaSS]

Might work Bentley?

I'm trying to find a suitable replacement for this one from my Z/28. It's a tach housing that came from the Z/28 stocker and had a radio delete plate on it. I removed that today to start restoring it only to discover it had 5 screw holes drilled under the radio delete plate as seen here. Don't want to use this one now. :thumbsdown:

https://i.ibb.co/jL9DR0W/IMG-3536.jpg

I'd like to find a clean replacement with good radio holes and plan to reuse the speedo, tach, and clock from it. Just need a clean tach housing with center hole cut. As long as it's got all the mounting holes and isn't cracked or broken I could add the rosewood plate to cover rear defrost as suggested. It's for a restored car so hopefully something really clean that doesn't need a ton of work to get it up to snuff.

PM for email address or text # for pics if you have something. Thanks


Wow, talk about an u pleasant surprise. Sorry to hear about the discovery.



Jason

[NorCam]

Wow, talk about an u pleasant surprise. Sorry to hear about the discovery.

Jason

I know eh...

And I just watched you sell a really nice survivor housing on eBay and thought to myself...I should buy that just in case. Grrrr

[Harris57]

Might work Bentley?

I'm trying to find a suitable replacement for this one from my Z/28. It's a tach housing that came from the Z/28 stocker and had a radio delete plate on it. I removed that today to start restoring it only to discover it had 5 screw holes drilled under the radio delete plate as seen here. Don't want to use this one now. :thumbsdown:

https://i.ibb.co/jL9DR0W/IMG-3536.jpg

I'd like to find a clean replacement with good radio holes and plan to reuse the speedo, tach, and clock from it. Just need a clean tach housing with center hole cut. As long as it's got all the mounting holes and isn't cracked or broken I could add the rosewood plate to cover rear defrost as suggested. It's for a restored car so hopefully something really clean that doesn't need a ton of work to get it up to snuff.

PM for email address or text # for pics if you have something. Thanks

I have this one in my garage. Needs cleaning up and wood grain inserts due someone opening up the holes. The silver is really nice though. I have original inserts if needed

[Harris57]

I have this one in my garage. Needs cleaning up and wood grain inserts due someone opening up the holes. The silver is really nice though. I have original inserts if needed

More pictures

[NorCam]

Thank you for the offer. I think we have found a suitable repair option for the one I have here, and have also been offered a good original as a backup plan if needed. I appreciate the replies from everyone.

Thanks for the ad space sYc.