Log in

View Full Version : Spring ring battery cables


67 Nova Boy
05-26-2019, 06:23 PM
What is the best way to "Clean" NOS battery cable. I'm talking about the spring ring head

that attaches to a battery. The head part is clean but faded and want to bring back to new

looking.

https://i172.photobucket.com/albums/w7/busbymoran/IMG_5577_zps5tnu3ulc.jpg

https://i172.photobucket.com/albums/w7/busbymoran/IMG_5578_zps6flmu8f4.jpg

https://i172.photobucket.com/albums/w7/busbymoran/IMG_5579_zps7olgrsvo.jpg

Dave
67 Nova Boy

BOWTIE67327
05-26-2019, 07:02 PM
some of that mag wheel cleaner may work? baking soda?

olredalert
05-26-2019, 07:16 PM
----Glass bead it and then go over it with fine steel wool...….Bill S

67 Nova Boy
05-26-2019, 07:25 PM
How about vapor blasting instead of glass bead? Will baking soda bring back to new finish?

Thanks for the ideas!!

Dave
67 Nova Boy

L78M22Rag
05-26-2019, 09:03 PM
That’s an original!! I’d leave it as is. As soon as you go messing with the finish, it may never look original again.

Jonesy
05-28-2019, 06:28 PM
I would leave that alone also.

R68GTO
05-28-2019, 11:36 PM
Maybe try one of the above suggestions on the side that goes against the battery, that way if it messes it up you'll never see it once installed.

67 Nova Boy
05-29-2019, 01:39 AM
Maybe try one of the above suggestions on the side that goes against the battery, that way if it messes it up you'll never see it once installed.

The positive cable looks new, so to put the negative cable on looking like it's 50 years old, just won't look right. We will see what happens when I get that far... really close now.

Dave
67 Nova Boy

Burd
05-29-2019, 01:39 PM
I had a distributer done at a vette resto shop, I believe he used walnut shells to blast it, it just cleaned it up, it looked great.

firstgenaddict
05-30-2019, 08:14 PM
With lead you could use a tooth brush and some comet or bar keepers friend powder polish or even baking soda, which would neutralize any acid too.

ronzz572
05-30-2019, 09:10 PM
I would surely would experiment a little on a junk battery terminal 1st. No sense in ruining your originals. Theres a lot of great ideas. One of them should work.

67 Nova Boy
05-30-2019, 10:50 PM
All very good ideals! I have some repo cables that I hope are the same lead design. They are also spring rings with battery corrode on them so one of the ideals has to work.

Thanks all for the in-site!

Dave
67 Nova Boy