WIW, 69 Camaro power window set

[KevinW]

So I have a factory 69 Camaro PW setup, take off from early 80s. Doors, qtrs, switches, wiring (some cuts), nice black deluxe door panels and some extra motors. Unknown if working, but stored well since then. Warren had a "wanted" ad up. Only have the door panels, not the qtrs interior panels, sorry. Probably sold them when I pulled them since I have convertibles.

I suck at valueing these types of parts, any help?

I know I need pics, but have to pull those heavy things out of boxes in the basement first :(

Thanks!

[X66 714]

I had 2 sets of power windows that I sold a couple of years ago. I had every wire from the horn relay back. All the circuit breakers, relays, switches, harness, regulators, etc. all working. No décor panels. I got 500.00 per set. One on freebay, another outright sale....Joe

[travlnz28]

If the door panels are nice there is some good value there as well.

[ruralrte66]

Are the rear regulators for a convertible? I dont know of the value, but would like to have power in my convertible.

Thanks Gregg

[KevinW]

Thanks all, door panels are really nice, but I have to take a good look at them. Drivers has some edge wear rear top, I think pass side is better.

I have to get some pics up :)

Rear regulators are the same, coupe or vert. Only interior qtr panels are diff.

[KevinW]

Sorry, picked up a bug on Friday and feeling poor and was not able to pull parts :(

Pulled the door panels 1st, will hunt down the rest later today.

Carpet needs to be replaced on both panels, drivers door has missing vinyl and crack upper rear edge. No other issues I can see, armrest looks good.

http://www.fototime.com/864BC6B93BF745A/standard.jpg
http://www.fototime.com/8A5934826C3DA80/standard.jpg
http://www.fototime.com/EAEA625978842C9/standard.jpg

Pass side has no cracks, but I see some ripples on armrest. bottom rear is bowed out a little.

http://www.fototime.com/C177D49E0597239/standard.jpg
http://www.fototime.com/DBAB96575C8AF6D/standard.jpg
http://www.fototime.com/D5D18D6EFF295C9/standard.jpg

[KevinW]

Regulators:
http://www.fototime.com/0A920EB92AF45D0/standard.jpg
http://www.fototime.com/97638747EFDD2E1/standard.jpg

Switches:
http://www.fototime.com/1B94BE947E0A5B9/standard.jpg
http://www.fototime.com/79508275F5D5B78/standard.jpg

Extras:
http://www.fototime.com/F56227FB959F924/standard.jpg

Wiring, missing a bug chunk over the dash I assume, plus cuts at doors and qtrs :( worse then I thought:
http://www.fototime.com/E680FD4EE3F7C1C/standard.jpg
http://www.fototime.com/71D43144483C834/standard.jpg
http://www.fototime.com/926E8CFD3CC15F9/standard.jpg
http://www.fototime.com/0388255820F316A/standard.jpg

[ssl78]

Would rear regulators be different in a convertible than a hard top. I know the shape of the glass is but thought regulators were the same.

[ssl78]

I would say the power window set up is worth a thousand dollars with out the door panels

[KevinW]

The rear regulators are the same coupe & vert. The glass on a vert only is different in the top contour. The rest of it is the same. thx

[KevinW]

Ok, laid the wiring out, it is just missing one side qtr window harness ($55). Have the qtr end, just not the long connector that goes under the carpet to the dash. Pretty sure I have the relay, but not the feed wire.

So am I still in the ballpark $500 to $1000 for the PW and what about the door panels? Are PW panels more rare and $$$ or smaller market and thus less $$? :D

I tried looking in my parts book for the numbers painted on the motors, but could not find anything. They are sequential, doors 7724365 & 7724364, qtrs 7760242 & 7660243.

Thanks for all the help!

[KevinW]

I found the missing qtr feed wire, so all there, just needs splicing. Still hunting for relay. :)

[KevinW]

Sorry for the lateness in responding, between being sick and storm related power outages, I could not get back to this :D

Thanks all for the responses. The best course of action is for me to repair/restore the wiring harness and fully test the system before posting it up for sale. I think that is the fair way to proceed. The box of PW parts weighs 55 lbs! :eek: shipping will be a bear. Hopefully somewhat close to the east coast will want it. :)