View Full Version : 400 + lbs of Restored hardware black and cad
Enoch
07-20-2019, 03:01 PM
THREAD CLOSED AS OF 9/10/19......all items were either sold or moved to other threads
Just got back from the platers about 400-plus pounds of original restored Hardware. We'll be putting together many more sets for various cars. Front end sheet metal kits, suspension kits, engine and drive line kits, as all the other ones have sold. Will be putting them together for Chevelles Camaros novas Impalas Corvettes GTOs etc etc. If there's any year specific car you're looking for hardware for whether it's an individual bolt or a complete kit let me know. Keep checking this thread as I will start post parts and pieces on it. Thanks SYC!
Hrlyfxdl
07-20-2019, 05:11 PM
Nice Rich, looking forward to it.
Enoch
07-20-2019, 08:25 PM
First up will be four different sets of 67 through 69 Camaro d80 front spoiler mounting hardware. All restored original pieces along with for NOS nuts.
Set 1 4 AF 10-24 bolts with recessed head and captured flat washer.
5/16-18 rbw head marking bolts pinched tip recessed head captured flat washer
4 5/16-18 Anchor head marking flat tip bolts with recessed head capture flat washer
And for 10/24 nuts 3/8 hex captured conical washer. Perfectly restored pieces. $90. Ppff
Enoch
07-20-2019, 10:17 PM
Restored original blower motor to outer heater box mounting bolts, P headmarking. $40 ppff
Enoch
07-21-2019, 12:03 AM
Set 2 and 3 of original restored 67 through 69 Camaro d80 front spoiler mounting hardware. All restored original pieces along with for NOS nuts.
4 AF 10-24 bolts with recessed head and captured flat washer.
2 5/16-18 rbw head marking bolts pinched tip recessed head captured flat washer
4 5/16-18 SEMS head marking flat tip bolts with recessed head capture flat washer
And for 10/24 nuts 3/8 hex captured conical washer. Perfectly restored pieces. $90. Ppff
************SOLD************
Enoch
07-21-2019, 12:15 AM
4th set of original restored 67 through 69 Camaro d80 front spoiler mounting hardware. All restored original pieces along with for NOS nuts.
4 AF 10-24 bolts with recessed head and captured flat washer.
2 5/16-18 E head marking bolts pinched tip recessed head captured flat washer
4 5/16-18 SEMS head marking flat tip bolts with recessed head capture flat washer
And for 10/24 nuts 3/8 hex captured conical washer. Perfectly restored pieces. $90. Ppff
Enoch
07-21-2019, 12:31 AM
Excellent original restored 10 and a half inch clutch starter bolts. Correct for Z28 L88 ZL1 and 67 and earlier small blocks.
Included are two c grade 8 starter mounting bolts
One flying F starter brace to block mounting bolt
1 NL head marking solenoid Shield to starter brace mounting bolt
And one flanged nut with e marking which mounts the starter brace to the starter. These are extremely nice. $60. Ppff (X)
***********SOLD ************
Enoch
07-21-2019, 12:39 AM
ZL2 Cowl induction hood solenoid and relay mounting hardware.
The AF head marking bolt attaches the solenoid to the flapper door bracket
And these RBW head marking bolt attaches the relay to the firewall. Excellent restored pieces. $35. Two sets available.
Enoch
07-21-2019, 12:48 AM
ZL2 Cowl induction hood solenoid and relay mounting hardware.
The Anchor head marking bolt attaches the solenoid to the flapper door bracket
And these ((D)) in circles head marking bolt attaches the relay to the firewall. Excellent restored pieces. $35.
Enoch
07-23-2019, 03:46 PM
Original restored battery hold down clamp mounting bolts. The two would the flat and enlarge washer are the early styles up until mid to late 69. The one with the smaller washer and pointed tip was introduced sometime late 68 69.
Sems
LF
S
$30 each ppff
Enoch
07-31-2019, 04:01 PM
Transmission mount to crossmember bolts TR very nice.
$20 ppff
Enoch
08-29-2019, 03:27 PM
New price on all spoiler Hardware kits listed in this thread. $60 shipped to the lower 48. P P FF
Enoch
09-02-2019, 02:26 PM
Excellent original restored 10 and a half inch clutch starter bolts. Correct for Z28 L88 ZL1 and 67 and earlier small blocks.
Included are two c grade 8 starter mounting bolts
One flying F starter brace to block mounting bolt
1 NL head marking solenoid Shield to starter brace mounting bolt
And one flanged nut with e marking which mounts the starter brace to the starter. These are extremely nice. $60. Ppff (X)
New price $45 ppff
Enoch
09-02-2019, 03:18 PM
Set 2 and 3 of original restored 67 through 69 Camaro d80 front spoiler mounting hardware. All restored original pieces along with for NOS nuts.
4 AF 10-24 bolts with recessed head and captured flat washer.
2 5/16-18 rbw head marking bolts pinched tip recessed head captured flat washer
4 5/16-18 SEMS head marking flat tip bolts with recessed head capture flat washer
And for 10/24 nuts 3/8 hex captured conical washer. Perfectly restored pieces. $90. Ppff
Labor day sale all spoiler kits $50 shipped
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.