Carlisle finds/Labor day specials

[Enoch]

Excellent original restored big block starter brace with original ELH head marking mounting bolt and 1/4-20 keeps nut. $50 ppff

[Enoch]

396 427 454 TR head marking valve cover bolts. Complete set of 14. As nice as you're going to find. $100. Ppff (x)

************SOLD************

[Enoch]

To outstanding original restored sets of Motor mounts to frame stand bolts. (F) head marking with extra sick flat washers and original mardsan nuts. Great pieces. $65 per pair Ppff

[Enoch]

Extremely nice original unrestored 889 Horn relay. With black plastic base. $45 ppff (x)

[Enoch]

Two original 621 bellhousing. $125 each plus shipping. First one has two very small weld repairs that you can see from the inside with GM at the 12 position viewed from behind. And has no pitch or corrosion at all.

The second has GM on the side by the 621 and has some corrosion pot marks on it. And is greasy inside as I didn't get to clean that.

First set of pictures is of bellhousing number one

[Enoch]

Bellhousing number two pictures

[Enoch]

Very nice original pair of emergency brake cable connectors DD stamped perfect pit free. $50 ppff

[Enoch]

19 RBW head marking 3960314 recessed/flanges with pinched tip front end sheet metal bolts.VERY NICE unrestored. $95 ppff ver hard headmarking to find.

[Enoch]

Complete set of 14 CH head marking big block valve cover bolts. Restored. Very very nice. $80. Ppff
************SOLD ************

[Enoch]

Mid 1966 up small block with steel valve covers. Correct for l79 67 68 Z28 etc etc. Very nice original n a t head marking. $50 ppff (x)

[Hrlyfxdl]

Mid 1966 up small block with steel valve covers. Correct for l79 67 68 Z28 etc etc. Very nice original n a t head marking. $50 ppff (x)


Rich, I got a set of these from you awhile ago, they looked great. Thanks

[Enoch]

Removed from a low mileage 69 Camaro. Power steering pitman arm part number 3953219. 1 1/8 inch spline hole. $60 ppff. Very nice restored original pit free piece. Very tight ball socket
5 and 1/4 inch Center to Center not fast ratio. Standard ratio.

[Enoch]

Very nice original 12in long power break booster hose. When I took the check valve off it still had remnants of the paper tag. Still flexible. Has a couple of minor hairline cracks in the outer rubber. Still holds vacuum checked it before. $80.

[Enoch]

67 68 69 Camaro Firebird under dash insulation. Original. I remove this from a 69 Z28 about thirty some odd years ago. It's been sitting in a box in the Attic since then. It has a couple of small tears here in there but it is the best original one I've ever taken out. The repos aren't even close. $350 PP FF

[Enoch]

Original SB head marking grade 8 flywheel to crankshaft mounting bolts. Restored. $30 ppff

[Enoch]

69 Z28 70 LT1 aluminum valve cover grommets. Extremely hard to find nice original ones like these. The one side is flat the other side is angled. All have their correct embossings and markings on them. $40 PPPFF

[Enoch]

68-71 small block engine lift hooks. Absolute perfect condition. As nice as your going to find unrestored. The front hook has some original paint on it and the Omega stamp. The rear bracket doesn't have a stamping but has all the striation marks in the ridge is on the edge that only originals have. Both bolts have CP for their head marking the front is flanged and the rear is trimmed. $35 ppff (x)

[Enoch]

Original big block short fuel pump mounting bolts, B&H head marking and L in a circle stamped fuel pump push rod plug. Very nice restored original pieces. $45 PP FF (X)

[Enoch]

Excellent original restored small block fuel pump mounting bolts and fuel pump plate to block mounting bolts.

These are the 9/16 hex design fuel pump mounting bolts with the flying f head marking and the fuel pump mounting plate bolts have SEMS for their head marking.

I've included a picture to show why the mounting plate bolts are unique to this application and most people have the wrong ones. The fuel pump mounting plate bolts are a little bit longer than regular timing chain cover and small block oil pan side rail bolts. And that's to make up the difference for the thickness of the plate itself that they're mounting.

$45 for the set. Two sets available.

[Enoch]

Convertible hinge mounting bolts with serrated bushings and lock nuts. Nice original pieces removed from a 69 pace car decades ago. Replated. $25

[Enoch]

65 396 L78

67 68 69 427 L88

69 ZL1

Thermostat housing mounting bolts. Excellent restored original pieces. The long but has L8 for its headmarking in the short bold has P. As nice as you're going to find. A $80. (X)


​​​​​​​

[Enoch]

1970 up PCV valve cover hose and T. Included are two original unrestored olive green clamps one original hose and one original tee with original part number on it. $45. (X)
************SOLD ************

[Enoch]

Small block fuel pump and mounting plate bolts. Restored originals. Two original E head marking fuel pump to block mounting bolts and to anchor head marking fuel pump mounting plate to block mounting bolts. I've included a picture of the difference between a fuel pump mounting plate bolt and a timing cover bolt which most people use in this application and is incorrect. The correct ones are longer to make up for the difference in the thickness of the plate. $35. Three sets available PP FF (x)

[Enoch]

One pair of original Wittek # 2 power steering return hose clamps. They do not reproduce these original clamps with a right stamping. $80 pair. (X)

[Enoch]

Three original Buss fuses. Two white stripe that are 25 amp; $ 15 each.
The pink 4 amp is $20. Very nice original pieces.(X)