Bits and Pieces

[Damien]

Looking for some small stuff for my '69 Chevelle if anyone can help?

Correct throttle bracket 396 w/ Quadrajet #3992376
Q Jet carb stud & wing nut
1/4" & 3/8" pinch clamps
Filter bracket
Correct PCV hose

TIA

[ALLZS]

I should have the pinch clamps how many do you need

[Enoch]

If you let me know length and configuration on the Quadrajet carb stud I probably have it. And I definitely have the Wingnut

[X66 714]

The pcv hose can be ordered from Doc Rebuild, The Corvette guy. Ribbed & curved...Joe

[Damien]

I should have the pinch clamps how many do you need


I will take 6 of each if you have them?

[Damien]

If you let me know length and configuration on the Quadrajet carb stud I probably have it. And I definitely have the Wingnut

Apologies Rich, I probably should have been clearer, the stud I am chasing is for the air cleaner. Is there a variation in these?

[Postsedan]

Damien,

Looking Great!

You also need a Cowl Seal and the correct metal clips....and those plastic Cowl Covers were never on any 1969 Chevelle.
Also run your orange heater blower wire on the Bottom side of your heater.
It’s coming along nicely. Keep up the great improvements.

Dan

[Damien]

Thanks Dan.


It had a rubber cowl seal on it but I took it off. Pushes the rear of the hood up.
It needs a foam seal.

[Postsedan]

Thanks Dan.


It had a rubber cowl seal on it but I took it off. Pushes the rear of the hood up.
It needs a foam seal.

Damien,

My hunch is that the former car owner purchased a reproduction Cowl Seal from Ground Up, Inc.
I know this because the former owner worked part time for Ground Up. Or you may have an early style reproduction hood which has now been redesigned better. Their early reproduction hoods were notorious for sticking up in the back.

What you need is an original Cowl Seal :)

Dan

[Damien]

Dan,

Original seal, as in NOS? Or original as in design?

Carb stud and wing nut sorted.

The big things for me are the throttle bracket and filter clamp.

[Postsedan]

Dan,

Original seal, as in NOS? Or original as in design?

Carb stud and wing nut sorted.

The big things for me are the throttle bracket and filter clamp.

Yes, an original used cowl seal is best....as they are already worn in place. Plus you will need the original metal clips.

The carb throttle bracket is a fairly easy find....an original or NOS fuel filter bracket is Hens Teeth :(

Dan

[Damien]

All sorted here. Thanks.