hurst super shifter 3 in a 67 major cutting?

[Donniedee]

im thinking about installing a new in box hurst super shifter 3 in my 67 with no concole, is this more trouble than its worth? don't really wanna butcher my floor

[big gear head]

I posted another reply on Team Camaro. I didn't cut much of my floor. Picture is when I had the Ramrod in it, but the hole size is the same.

[Lynn]

If the handle is interchangeable, and you use the correct handle, I don't believe any cutting is necessary. It is the Vertigate that requires major floor surgery.

Some one correct me if I am wrong.

[big gear head]

The Super Shifter sits high and to the left just like the Ramrod. It requires a larger hole in the floor.

[Lynn]

Thanks for correcting.

You can't put in an offset handle?

[scuncio]

I seem to remember the SS3 having straight rods, which requires the shifter body to be in a very different position than the stocker.

[big gear head]

Yes, the Super Shifter mounts the whole shifter body higher and to the left, so the hole has to be cut out larger for the body and rods to fit. It doesn't matter what handle you put on it because the shifter body is what requires the larger hole. If I get a chance later today I'll post pictures of the mounting bracket for the competition plus and the super shifter so that you can see how much the shifter body is moved.

[luzl78]

im thinking about installing a new in box hurst super shifter 3 in my 67 with no concole, is this more trouble than its worth? don't really wanna butcher my floor get a different shifter so floor doesn’t have to be cut. Competition plos?

[big gear head]

Here is one of my Super Shifters mounted on my new AutoGear N24. You can see that the shifter is mounted much higher and a little to the left.

[JoeC]

I put a Hurst Super Shifter in a 1970 Nova and did not remove any metal.
I had to cut and bend and fold metal but did not remove any so it can be put back with some seam welding

[rszmjt]

I’ve put Super Shifters in 67-69 Camaros before and like Freddie posted you have to cut a pretty big hole in tunnel for shifter /bracket assembly. I think you also have to cut a slot for the 3-4 rod to clear too.

[bugsy]

Get a shifter from Leonard Long, G- Force. You will never use a Hurst shifter again. Best in the business. They can put the handle any where you need it. Quality is # 1.