Z28

[68bronze]

Hello there members hope you are staying safe > real or restamped

[BARRY]

restamp

[68bronze]

restamp

how can you really know!

[rszmjt]

how can you really know!


x2.

google the distributor number and search known originals you will spot the difference, or do a search on this site, there are known originals that have been posted here.

[parkbrau]

how can you really know!

If you are on Facebook, join All Chevy Muscle Swap Meet-Buy Sell, there is a perfect 1111467 8B8 distributor for sale there. Compare that one to the one you showed and it will stick out like a sore thumb as to why the one you posted is not as advertised. Maybe that 8B8 will work for you.

[roeville]

If you are on Facebook, join All Chevy Muscle Swap Meet-Buy Sell, there is a perfect 1111467 8B8 distributor for sale there. Compare that one to the one you showed and it will stick out like a sore thumb as to why the one you posted is not as advertised. Maybe that 8B8 will work for you.

This one:

[wvhylander]

That's a restamp and I'm a novice at this.

[parkbrau]

This one:

Yeah, thanks. HTH did you get a pic? I tried and couldn't do it. Maybe my browser.

[68bronze]

This one:

that does look like a restamp how do know 100% sure these days!!!!!!!

[rszmjt]

The Facebook distributor is real

[68bronze]

The Facebook distributor is real

looks like to me that the last 8 is a restamp over the eight!! my two cents worth

[Jonesy]

Its pretty obvious the 6 and 7 in the first post are not like the other numbers

[rszmjt]

looks like to me that the last 8 is a restamp over the eight!! my two cents worth

The distributor numbers are not stamped into the housing, the distributor housing is rolled against a fixture that held the characters, sometimes double imprints or ghosting does occur.

Compare the last 3 numbers of the Facebook “distributor number “ to the one initially posted and you will notice why the 1st one is phony. I don’t like to post the actual font issues as it’s something that I’ve got notification from people before not to do to clue in the stampers.

[rszmjt]

Another good way to tell a restamped distributor is by the upper housing diameter, it should measure 3.810 where the numbers are and the upper undercut area for cap should measure 3.795 for approx .200 before it gets to the 3.810 diameter. If you put a distributor cap on a restamped hsg it will move on housing if you push it. They have to turn the housing down to eliminate the original numbers before restamping so diameter is smaller than original. Another good trick is to spray the number area with brake cleaner, if it’s been welded up and restamped you will see shiny areas because of the different metallurgy of housing and filler rod used.