Master cylinder rebuilding/sleeving

[X66 714]

Who's the best for this service. I have a 309 that won't clean up. Thank you, Joe

[napa68]

Joe,

I have used Whitepost on several occasions with good luck.

https://whitepost.com/brake-sleeving-rebuilding-services/

Hope that helps!
Tim

[X66 714]

Thanks Tim...Joe

[Mr.Nickey Nova]

Whitepost did mine last year, had to return it for a slight leak. They fixed the leak and so far everything is good. They had my Master for 4 weeks due to Covid.

[Damien]

These guys for me.

https://www.brakeboosters.com/

[scuncio]

I used Karp’s and a Raybestos rebuild kit (and had Steve Gregori plate the cover). Turned out mint.

[X66 714]

I used Karp’s and a Raybestos rebuild kit (and had Steve Gregori plate the cover). Turned out mint.
Somebody else sent me an e-mail about Karp. Thank you, Joe

[scuncio]

Sorry Joe, I gave you the wrong info! I actually had Apple Hydraulics sleeve the master. For some reason I had Karp's on the brain, but I had narrowed it down to Karp's and Apple, and chose Apple because they sleeved in brass rather than in stainless. Both vendors had excellent feedback so I don't think you could go wrong with either.

-Tony

[RPOLS3]

I just sent some original rear wheel cylinders that would not clean up to Karp's last week for sleeves and bought the rebuild kits to re-assemble myself.

[X66 714]

Sorry Joe, I gave you the wrong info! I actually had Apple Hydraulics sleeve the master. For some reason I had Karp's on the brain, but I had narrowed it down to Karp's and Apple, and chose Apple because they sleeved in brass rather than in stainless. Both vendors had excellent feedback so I don't think you could go wrong with either.

-Tony

Thanks Tony. Is one sleeve better than the other?...Joe

[jl8z28]

I had apple do mine

[carnut4life]

I sent two master cylinders, two wheel cylinders and a proportion valve to Karp's back in November and they're still not done so they must be really busy.

[X66 714]

I sent two master cylinders, two wheel cylinders and a proportion valve to Karp's back in November and they're still not done so they must be really busy.

WOW. That's not good. Thank you, Joe

[frankk]

Just got my M/C back from Mike Gibbons brake restoration. The lid was done very well but have not yet put the brakes back into service.

[bergy]

Mike does EXCELLENT work. I highly recommend him :-)

Also, Mike is a sponsor of this great site.

[napa68]

I did not realize Mike was doing masters (til now). I was really happy with the service I received on my booster. This site proves it's worth again!

Tim

[Steve Shauger]

Mike Gibbons does excellent work, and a sponsor on the site. He has expanded what Steve Gregori was offering. Quick turn around and excellent quality and detail!

https://www.brakeboosters.com/

[luzl78]

I did not realize Mike was doing masters (til now). I was really happy with the service I received on my booster. This site proves it's worth again!

Tim

I think he sends the masters and proportioning valves out. He said I’m at the mercy of the rebuilder with time

[69SSRSL89]

I had Brake & Equipment Warehouse here in Minneapolis, MN do mine last summer and they turned it around in a few days, but they might be a little longer on waiting time now. It can hurt to check with them. They did great work. You can reach them at 612-378-3134. When you call you will need to ask for the guys in the shop. I hope this helps you out.

[Grim70]

Lonestar Caliper did a phenomenal job on one for me. (I'm going to have another post on how the booster turned out from Mike at Brakeboosters)

Ken McCormick

Lonestar Caliper Co.

11299 Interstate 20

Canton, TX 75103

903-829-8400 Fax 903-829-8405

[email protected]

www.lonestarcaliper.com

[AnthonyS]

For what it’s worth gang, I’m a couple miles away from Karp’s.

Never used them though.

[cook_dw]

Last place I used was White Post. Lead time was around a month iirc.. This was an unrestored sleeving and rebuild with no restoration. Shipped out the 11th and received it back on the 6th of the following month. Cost was $175 plus shipping. That was just the master cylinder. I did the preservation previously before shipping it to them.

[60sStuff]

I used White Post for my ‘65 GTO in 2015.

Five factory pieces, all four wheel cylinders and dated master cyl. were S/S sleeved with new seals / boots etc.

Works perfectly.

[CamarosRus]

Looking for a thread that has application codes for "409" Master Cylinder

EB = 70 Camaro
BB = 70 Chevelle

CF = ????????

[67 Nova Boy]

I used Karp’s and a Raybestos rebuild kit (and had Steve Gregori plate the cover). Turned out mint.

X2

Dave
67 Nova Boy