3927186 2.02 Heads, late 68 dates

[scuncio]

I have a nice set of -186 heads dated J28 and L5, both 1968. These have been rebuilt at some time, and run on a mild 406 until I bought them out of the running car. No porting, still retain original press fit rocker studs. Have been drilled for the 400 steam holes, will not affect anything if you put them back on a 302 or 350. I would clean them up and go. Looking for $750 or a good reasonable offer. Nice early Z dates....

Thanks sYc!

[chevyandpontiac]

Tony, do these have the accessory bolt holes?

[scuncio]

Dan - yes, they do

[scuncio]

Still available, price reduced to $650 plus the ride.

[scuncio]

Price reduced to $550 plus shipping, or a good offer.

[scuncio]

Price reduced to $500 or best.

I also have another bare set (pretty sure those are 1.94 heads) both dated J 18 8, that have been cleaned, magged, and surfaced, but were stored in a garage for ~20 years and will need to be hot tanked again. Looking for $175 plus the ride for those. Pics below:

https://photos.smugmug.com/SYc-Site/i-jM3W66p/0/dcf5dc67/X2/F1E0C7D6-6F35-4C45-8418-AE3C8CCC4554-X2.jpg

https://photos.smugmug.com/SYc-Site/i-ZzRkfsf/0/3f27e1db/X2/EDD9B53B-3167-43FA-B89D-FEED40C16EEE-X2.jpg

https://photos.smugmug.com/SYc-Site/i-ZrwZ3gZ/0/ce2c61c7/X2/572424BC-AE80-422B-961C-34E8BC666346-X2.jpg

https://photos.smugmug.com/SYc-Site/i-wDNSRDz/0/9c67a734/X2/C542DE74-7A25-446F-BE2F-95B9541D54D3-X2.jpg

https://photos.smugmug.com/SYc-Site/i-QPDJdJc/0/6ed1ef08/X2/CEF6CE9A-08ED-43C2-BE36-AA432755B260-X2.jpg

https://photos.smugmug.com/SYc-Site/i-c3fJnWp/0/68ab03f7/X2/16285DE9-07C8-4897-86BB-370C8C0371C2-X2.jpg

https://photos.smugmug.com/SYc-Site/i-wQ3xCTC/0/c0aedab1/X2/290988F1-5C6E-40D7-87FE-24B313FBC357-X2.jpg