'69 Camaro Baldwin Motion Clone

[scuncio]

If there were ever a car to clone, this would be near the top of my list. This one has some room for improvement in the accuracy department, but overall the look is pretty solid from 20' away. Needs a set of tow tabs now....

Link to 1969 Camaro Baldwin Clone / Tribute auction (https://ebay.to/2TVQX95)

https://i.ebayimg.com/00/s/MTYwMFgxMjAw/z/03MAAOSwYjVgvnPP/$_57.JPG?set_id=8800005007

https://i.ebayimg.com/00/s/MTYwMFgxMjAw/z/qB0AAOSwET5gvnO8/$_57.JPG?set_id=8800005007

https://i.ebayimg.com/00/s/MTYwMFgxMjAw/z/AUAAAOSwzlZgvnRv/$_57.JPG?set_id=8800005007

https://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/RIwAAOSweVJgvnUw/$_57.JPG?set_id=8800005007

124379N711128

[carnut4life]

All this car needs is Rob's L88 hood and a fly eye air cleaner and it would be the perfect clone of my favorite car ever!

[Mr70]

The Caution Fan sticker is a deal breaker.

[big gear head]

Correct valve covers, air cleaner and GET THAT STICKER OFF OF THE FAN SHROUD!

[GotGrunt]

It needs the correct rear spoiler too!

[carnut4life]

Do they hand those caution fan stickers out for free somewhere that I don't know about? And what cars did they actually come on? Seems like every car on ebay and facebook has one.

[big gear head]

It's a Ford sticker. There was a '68 Camaro at the car show I went to last Saturday that had one on it.

[olredalert]

----I don't know why people run the PCV hose around the back side of the engine. I know the carb must have the port on the back, but you could still run it around in the correct way and almost nobody would notice under the air cleaner! My rant for the day as I see this all the time.....Bill S

[COPO]

Don't think many Motion cars left the shop with exhaust manifolds. :-)

It does seem to be a nicely done car and easy fixes to make it a more accurate clone.

[427TJ]

Looks like 14" mags?

[seventieshow]

Change the intake manifold for a L-88 type dual plane, and maybe change the brake booster to OEM. +2 on headers, and an L-88 hood would have been cool too. But I like it.

[markjohnson]

That intake manifold just screams “oval port”.

[RSSSfan]

That intake manifold just screams “oval port”.


No casting mark on the ends of the cylinder heads, so it is indeed oval port.

[RSSSfan]

Rally Green / white is one of my all-time favorite color combinations. Well done!