Valve Stem Caps ID

[lbnaz]

I came across an old Maxwell House coffee can full of valve stem caps. There are numerous different ones but these are some I am trying to ID. Thanks, Larry

[Enoch]

1st and 3rd picture have the caps that are worth $20-50 each.
3rd picture should say Schrader on the bar ontop. Both mentioned are Good Gm 60's to early 70's assembly line installed pieces.

[60sStuff]

Hi Larry,

The second photo with the USA on top of the cap is what was installed on my mid-60’s “American Racing Wheels” Torque Thrust when new.

They mounted on a DILL valve stem.

The last photo shows the correct cap (DILL 627) which came on both my Survivor GTO’s.

I would be very interested in 4-8 Nice USA Star caps shown in second photo.

Thank you, Chris.

[lbnaz]

Hello, yes the 3rd photo has schrader on them. I never noticed the USA on the 3rd one until you point it out. Its there almost need magnifying glass but its there. thanks, Larry

[lbnaz]

I also have the style you show for the GTO wheels. Larry

[DW31S]

Hard to believe the hobby has progressed this far…wouldn’t be shocked if someone starts reproducing the assembly line correct valve stems.
Do the judges deduct points for missing originals?

[mhm1966]

I know the NCRS judges deduct for the incorrect valve stem caps.

[jeremy clark]

the ones in the first pic....would you sell a set?