View Full Version : Wanted : power steering pump and mounting brackets
Jims69z28
08-16-2021, 12:16 AM
Looking for power steering pump and brackets for 69 z28 restoration !
Also looking for the correct pulley 3941105 DD.
Pm please. Thanks Jim
ALLZS
08-16-2021, 01:44 AM
I probley have a pimp and brackets but no deep pulley
"I probley have a pimp and brackets but no deep pulley"
Is this a line from a porno?
Whatever you do, do not try using a repro pulley. Pure junk. I also would not consider repro brackets.
Sent you a pm.
William
08-16-2021, 06:50 PM
Be aware that you must use a 1969 Camaro power steering pump, designed for variable-ratio steering. The service replacement variable ratio power steering gear was pn 3960246. It does not functionally interchange with anything; only application is the 1969 Camaro.
Chevrolet admonished against interchanging standard and VR steering components:
“The pump used on vehicles with variable ratio power steering provides increased fluid flow at higher pressure than the conventional pump. Consequently, the conventional pump and the pump used with the variable ratio system are not interchangeable. A new pump outlet hose is required on variable ratio power steering equipped cars.”
Jims69z28
08-16-2021, 07:40 PM
I did not know that William. Thank you for your post
Jim
Jims69z28
08-17-2021, 12:37 AM
Found power steering pump and brackets . Thanks for the ad SYC
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.