AnthonyS
08-22-2021, 06:01 AM
EVERYTHING SHOWN SOLD
Hi Gang, I recently found a restorer's lot of hardware that was recently white cadmium / cad plated.
prices as directly below and photos further below.
upper control arm dog bone / end hardware - concave washers and fine thread RSC head marking / marked bolts with lock / split washers. $40
alignment shims - various widths, 10 thick, 2 thin, 12 total with maker's mark. $40
original caliper bolts with the S stamping - for Stant I believe, with original shims / sliders $40
end link hardware - bolts and washers (two sizes) and two correct nuts and sleeves - one pair mushroomed a bit and one pair of bolts grooved from being loose I think. $20
control arm hardware - lower bumpers with nuts and retained nut clips and ball joint retainers. $30
sway bar bushing retainers - original assembly line pair with "fingers" SOLD the one pair without is still available. $20
miscellaneous hardware, nuts & bolts as shown. $40
This plating is not cheap.
$125 if you want everything, but you have to be first to ask, before anything else is sold. Package price will decrease as items are sold of course.
Cheers all,
Anthony
Hi Gang, I recently found a restorer's lot of hardware that was recently white cadmium / cad plated.
prices as directly below and photos further below.
upper control arm dog bone / end hardware - concave washers and fine thread RSC head marking / marked bolts with lock / split washers. $40
alignment shims - various widths, 10 thick, 2 thin, 12 total with maker's mark. $40
original caliper bolts with the S stamping - for Stant I believe, with original shims / sliders $40
end link hardware - bolts and washers (two sizes) and two correct nuts and sleeves - one pair mushroomed a bit and one pair of bolts grooved from being loose I think. $20
control arm hardware - lower bumpers with nuts and retained nut clips and ball joint retainers. $30
sway bar bushing retainers - original assembly line pair with "fingers" SOLD the one pair without is still available. $20
miscellaneous hardware, nuts & bolts as shown. $40
This plating is not cheap.
$125 if you want everything, but you have to be first to ask, before anything else is sold. Package price will decrease as items are sold of course.
Cheers all,
Anthony