confirm an original A12 Roadrunner hood?

[AnthonyS]

Hi Gang,

I don't know a whole lot about MoPars, but I stumbled across this and was wondering what you folks thought about this hood and if we could guess at a value.

I've been promised it's an original 1969.5 factory piece and from The Google I think it might be with all the evidence of green fiberglass et cetera.

But it's far from perfect and might be pretty rough - the center divider is gone and the corners are beat; this six pac A12 RR hood looks to have been bouncing around for years / decades... I cannot believe these are too common.

Any opinions welcomed on:

1. originality

and

2. value

Thanks in advance everyone,
Anthony

[Copo_Cartel]

We need Mopar Molnar !!

[BLACKLS5]

I'm not a Mopar guy but I don't think the 69 6-pack cars had that bulge running to the front of the hood shown on yours. I'm sure someone with more knowledge that me will chime in.

[Tracker1]

The underside actually looks right, but topside the scoop opening does not seem near big enough and what happened to the divider? It isn't there.

[Tracker1]

I'm not a Mopar guy but I don't think the 69 6-pack cars had that bulge running to the front of the hood shown on yours. I'm sure someone with more knowledge that me will chime in.

Yes, the A12 Road Runner had that bulge.

[dustinm]

Yes, the A12 Road Runner had that bulge.

The only ones I see on google search with that wide bulge are at dealerships. that was 2 cars of 30. The rest have a the thin bulge.

[AnthonyS]

From The Google, I think that's the difference between Dodge & Plymouth... thin v. wide.

[Tracker1]

The only ones I see on google search with that wide bulge are at dealerships. that was 2 cars of 30. The rest have a the thin bulge.

Thin on the Dodge Super Bee A12, wide on the Plymouth RR A12

[A12pilot]

Looks to be an original, but severely beat up. That center “I” missing is a big deal.

You can easily tell the difference on the underside where repops are usually smooth (Like Year One) where the originals are choppy. Also, the greenish gelcoat visible around the airbox. Hood pin retaining hardware is at the 3,6,9,12 O’Clock positions, and the a final item would be weight: Heavy = Original and Light = (usually) aftermarket. Yes to the wide center hood reveal line on Roadrunners. Just a very small line on the Bees. Looks like a factory hood to me!

A side note, when my Bee was judged, one of the things one of the inspectors dinged me for was the hood being aftermarket. After a quick explanation/education of the difference between the two to this “judge”and how it can be distinguished, along with the second owner of the car standing right there shaking his head, the points were quickly put back. :grin:

Value? in that shape, I’m not sure. Better to head over the A12mopar board and see.

Cheers
Dave

[Lee Stewart]

https://i.postimg.cc/0NsNhKp4/0.jpg (https://postimages.org/)

https://i.postimg.cc/jj4jTqcS/0a.jpg (https://postimg.cc/5HjJqVDh)

[AnthonyS]

Thanks everyone, and special thanks to Lee for the cool (as always) photos and Dave's opinion, although, I'm disappointed I didn't get a Dave Pun - something like being flabberglassted or "not being clearly divided on the scoop" or "green gel coat envy" or something similar!

:)

In any event, it's not worth it (to me) to investigate further as the current owner is looking for low four figures for it! And "it can sit another thirty years as long as he cares..." side note, it'll no longer be his issue by 2050...

[Too Many Projects]

I'll take the '69 BEE, please...:flag:

[John Brown]

In any event, it's not worth it (to me) to investigate further as the current owner is looking for low four figures for it! And "it can sit another thirty years as long as he cares..." side note, it'll no longer be his issue by 2050...

There is another hood somewhere down the road just waiting to be found, and quite likely in better shape. Never give up.....

[1967 4K]

The underside of this hood looks just like the Harwood produced hoods that have been discussed on the site recently. It’s construction appears like my stinger hood and other ones. I don’t know much about the Mopar stuff but it looks like a Harwood produced piece from its underside view. Good find.

[A12pilot]

Thanks everyone, and special thanks to Lee for the cool (as always) photos and Dave's opinion, although, I'm disappointed I didn't get a Dave Pun - something like being flabberglassted or "not being clearly divided on the scoop" or "green gel coat envy" or something similar!
...


Hmmm, I see. :hmmm:Well, there’s no doubt that the glassification of this hood will make one gesticulate correctly searching for a correct hood for one’s A12, but the condition and four figures?! Gonna have to quote my favorite Decepticon from the Transformers here, Negatron. “Nope, not gonna happen, nuh-uh, no way.”:thumbsdown:

Cheers:beers:

Dave

[AnthonyS]

There, now I can sleep. Thanks Dave!

[ELEFUNTMAN]

Also looks like the ones from “unlimited” in SoCal. I have an original for a Super Bee, however I need one for a roadrunner!! Or sell the rr and find a sb, hmm, probably not in my cards!:beers: