70 Hemi Cuda - OG paint good story

[sixt9rsx33]

Read the story from the original owner. Pretty cool.

https://www.ebay.com/itm/394038519722?hash=item5bbe86a7aa:g:P30AAOSwcGdiX6u V&vxp=mtr

[Keith Seymore]

Read the story from the original owner. Pretty cool.


That's awesome.

K

[Xplantdad]

Here:



217781

217782

[CamaroNOS]

Thanks....now that is what I call first hand experience.

Paul

[jeffschevelle]

Interesting. But one part sounds a little screwy. How would the tires on a new car hit the fenders, when the car would be one of ?? many built with the same fenders, same suspension, and same wheels and tires? And even if they did hit, why would the factory send that car out to a body shop to be repaired, as opposed to correcting the issue in house? If it was caught at the factory before shipping, then there should not have been any "body" damage from it, and all the factory would have had to do is adjust the fenders or adjust the front suspension/steering. Or even if there was some body or paint damage, I was under the impression that the factories had repair areas for exactly that kind of thing. So that part doesn't make any sense, to me at least.

Awesome car though!

[Charley Lillard]

Maybe that was the start of ‘Hemi fender’ fender tags.

[Tracker1]

Correct Charley, the 15 inch rally wheels and F-60-15 tires on 1970 Hemi E-bodies required a clearanced fender, wheel lips rolled back etc. Assembly line folk probably put the wrong fenders on in Hamtramck (this car may have been part of the learning for that).

Hemis came standard with 15s. Six-Pack and others ordered with 15-inchers as an option got E-60s.

As to why it had to go to an offsite body shop... :confused: dunno

[Tracker1]

Rolled fender

[Tracker1]

It was pretty crude

[jeffschevelle]

Very interesting. The write up says it came with plain steel wheels and dog-dishes. No wheel or tire related options are shown on the report that is pictured. So would that combo still have had a clearance problem?

[Tracker1]

Very interesting. The write up says it came with plain steel wheels and dog-dishes. No wheel or tire related options are shown on the report that is pictured. So would that combo still have had a clearance problem?

Yes the '450' steel wheel was a 15 incher wrapped in the same F-60-15 Polyglas GTs

[Tracker1]

The '450' (last 3 digits of part number/casting number) wheel commands a steep price today - restored sets can be $4000-5000 for date matched items, for something that got pitched in the scrap heap back in the day in favor of cool mags. Many Hemi car restorers cheap out on this item and try to pass off the shallow offset version with the narrow band (where valve stem sits), and when you know the difference it sticks out like a sore thumb.

[Tracker1]

$3.5 million Hemi Cuda convertible going across the block with the wrong (cheap) non - 450 wheels. Note narrow inner band and too-shallow offset which sets the hubcap too far out

[luzl78]

$3.5 million Hemi Cuda convertible going across the block with the wrong (cheap) non - 450 wheels. Note narrow inner band and too-shallow offset which sets the hubcap too far out
Could’ve got 3.7 with the right wheels

[Charley Lillard]

Says the car sold in 2008. Dave C. Sold his collection at Mecum Indy that year and had a black one with the red body side moldings.

[sixt9rsx33]

Tracker 1 you are right. The wrong wheels stand out like sore thumb. Never noticed but man when you bring it up definitely looks crummy with the shallow wheels.

[Keith Seymore]

Or even if there was some body or paint damage, I was under the impression that the factories had repair areas for exactly that kind of thing.

Joining late, but came to say: Yes - assembly plants absolutely have the ability to do paint repair and body work.

Normally there is a short paint repair line for "small"ish touch ups that can be done while the line is moving; there is also a stationary area for more major repairs.

Maybe it was more of a "make vs buy" decision in the case of this Cuda. Since there was metal fab/customization involved they decided to outsource it rather than do the repair in house.

My own Oshawa built Chevelle was hit and repaired in the assembly plant. We discovered bondo in the fender the first time we had them off for a repaint.

K