looking for a pair of MOOG 6308 springs

[LITTLE TOMMIE]

I am looking to buy a pair of MOOG 6308 front coil springs, if you have a pair or know of a pair please send me a private message, thanks you

[X66 714]

What do they fit? ...Joe

[Too Many Projects]

What do they fit? ...Joe


From the Moog website



Chevrolet Nova 1969-1972

Chevrolet Nova 1969 (https://www.moog-suspension-parts.com/products/chevrolet_nova_1969)
Chevrolet Nova 1970 (https://www.moog-suspension-parts.com/products/chevrolet_nova_1970)
Chevrolet Nova 1971 (https://www.moog-suspension-parts.com/products/chevrolet_nova_1971)
Chevrolet Nova 1972 (https://www.moog-suspension-parts.com/products/chevrolet_nova_1972)


Pontiac Ventura 1971-1972

Pontiac Ventura 1971 (https://www.moog-suspension-parts.com/products/pontiac_ventura_1971)
Pontiac Ventura 1972 (https://www.moog-suspension-parts.com/products/pontiac_ventura_1972)


Nova1972-1969Front
Quantity 1 4.1L L6 250cid

ChevroletNova1971-1969Front
Quantity 1 5.0L V8 307cid

ChevroletNova1970-1969Front
Quantity 1 2.5L L4 153cid

ChevroletNova1970-1969Front
Quantity 1 3.8L L6 230cid

PontiacVentura1972-1971Front
Quantity 1 4.1L L6 250cid

[SS427]

This is what it says on the Moog site; Front Coil Springs - Pair moog-6308 fits these vehicles: Chevrolet Nova 1969 thru 1972 Pontiac Ventura 1971 thru 1972

[X66 714]

Thanks. I have some somewhere for a 1969 El Camino ss396 we used to have. Didn't know the number..Joe

[Too Many Projects]

Thanks. I have some somewhere for a 1969 El Camino ss396 we used to have. Didn't know the number..Joe
Yours aren't going to be correct for a 6 cylinder/small block.

[Steve Shauger]

This spring is not available now. I used the 6308 on my 69 Z28 and it sits perfect. About an inch lower than stock. I tried to buy another set last summer and no longer available.

[LITTLE TOMMIE]

that's why I'm looking

[Big Block Bill]

Do you need the specs? I have an old Moog catalog that lists most spring specs. Let me know and I'll post the page that lists the 6308. I used them in many Camaros and Nova's over the years, as Steve stated, the ride height was perfect when the car had a Small Block in it. Let me know.

Bill

[Steve Shauger]

Here's a link to a picture I posted in 8/25/2020. The picture is post#28. Notice the gas prices....

https://www.yenko.net/forum/showthread.php?t=162752&highlight=spring&page=3

[Too Many Projects]

that's why I'm looking
Have you contacted MOOG and asked them what they replaced it with ? Many times they change something a little and give it a new part number. It may be superceded.

[napa68]

Have you thought of contacting Eaton Spring? Perhaps they have the specs for the Moog spring, have a better option, or can make what you want:dunno:

https://www.eatondetroitspring.com/

Tim

[LITTLE TOMMIE]

still looking for a pair of moog 6308 front coil springs for a 69 camaro. i have heard it well still be some time before they are available, and yes i have checked with Eaton spring about making me a pair but the price would be double to triple what a pair of moogs would cost me.
so i am still looking

[LITTLE TOMMIE]

any help, need for a 69 z28

[302moz]

I just installed a pair of these and the z sits to low .Going to add a pair of 1/2 inch rubber spacers to correct them.

[LITTLE TOMMIE]

Anyone have a pair of moog 6320 coils springs that they would sell me, thanks

[LITTLE TOMMIE]

ok i found a pair, thanks to all

[302moz]

They sit too low and look terrible

[hogdaddy]

I have a NOS pair of TRW 6310 coil springs to use on my 67 convertible w/v8. Anyone have pics of stance with these?