njsteve
09-13-2022, 11:42 PM
Just in case someone needs a cheap, used camshaft in nice condition, made a long time ago when the metal was still good.
I pulled this out of my old Black '72 Formula's 455HO when I rebuilt it back in 2012. It ran very strong but I was rebuilding the engine back to stock condition since it had some crazy 12 to 1 domed pistons in it from a rebuild back in the 1980's. The cam was soaked in BoeShield and then stored in a wax-lined, cam box and has been on my shelf ever since.
Crane H-272-2 Part Number: 283941
Good low and mid-range torque, good idle, daily usage, towing, performance and fuel efficiency, 2600-3000 cruise RPM, 8.75 to 10.5 compression ratio advised.
RPM range: 1800-5400
Intake @.050: 216
Exhaust @.050: 228
Lobe Sep: 112
Adv dur Intake: 272
Adv dur Exhaust: 284
Lift: Intake: .454
Lift Exhaust: .480
$25 plus shipping. Pickup welcome in NJ
Steve at [email protected]
I pulled this out of my old Black '72 Formula's 455HO when I rebuilt it back in 2012. It ran very strong but I was rebuilding the engine back to stock condition since it had some crazy 12 to 1 domed pistons in it from a rebuild back in the 1980's. The cam was soaked in BoeShield and then stored in a wax-lined, cam box and has been on my shelf ever since.
Crane H-272-2 Part Number: 283941
Good low and mid-range torque, good idle, daily usage, towing, performance and fuel efficiency, 2600-3000 cruise RPM, 8.75 to 10.5 compression ratio advised.
RPM range: 1800-5400
Intake @.050: 216
Exhaust @.050: 228
Lobe Sep: 112
Adv dur Intake: 272
Adv dur Exhaust: 284
Lift: Intake: .454
Lift Exhaust: .480
$25 plus shipping. Pickup welcome in NJ
Steve at [email protected]