Headers by Doug

[Ctown208]

I was wondering if anyone recalls the headers by Doug back in the early 70s.
If so maybe chime in and let me know the colors of the headers from that time

Were they painted factory or were most painted by the user?

Also guys doing white on your day two headers what are you using that holds up.

[Chuck_Burg]

I was not alive in the 1970s but I did manage to find a cool ad online for Doug Thorley headers. You can see they're black here. I have Appliance headers on my Camaro and had them done in white. They're ceramic coated... It's holding up ok but not perfect. I probably have about 500 miles on them. Cylinder number three primary showed some white flaking off after about 200 miles. Sort of disappointing considering it's not running lean but what can you do? I'm not planning on taking them back out :no:

I know Doug's and Doug Thorley's are two different makes, I believe Doug's stayed with Mr. Thorley and his ex-wife went on to make Doug Thorley headers. I think the story went something like :dunno:

[Xplantdad]

Headers by Doug was in Anaheim Ca. I remember the shop clearly (and the sign)...it was also a muffler shop, too.


Later the company moved to Riverside then was sold to the folks who own Pertronix, I think?

[John Brown]

Had Dougs Hedders on my small block drag car 67 Caprice in 73. They were orange.

[juliosz]

From the late sixties:

[juliosz]

These are really early Camaro small block Doug’s Headers. Flange is pretty close or identical to the Bill Thomas design.

[Ctown208]

Thanks everyone!

[PeteLeathersac]

‘

:beers:
~ Pete

.

[NorCam]

Love those old ads....

[cook_dw]

Those need to be in the Day 2 advertisement thread!

[PeteLeathersac]

‘

A few more old ads for Doug’s Headers.
:beers:
~ Pete

.

[PeteLeathersac]

‘

This Linda pics belongs here t:eek2::eek2:!
:beers:
~ Pete

.

[olredalert]

----Looking at all these great Doug's Headers adds give a little insight into why Doug and his wife may have divorced! I knew Doug a little and makes some sense.....Bill S

[scuncio]

----Looking at all these great Doug's Headers adds give a little insight into why Doug and his wife may have divorced! I knew Doug a little and makes some sense.....Bill S

Ha!!! Was thinking the same.

I had a few conversations with Doug when I worked for Car Craft...interesting guy for sure. He was proud of "Doug's" headers and justifiably so.

[PeteLeathersac]

‘

:3gears:
:beers:
~ Pete

.

[PeteLeathersac]

‘

:beers:
~ Pete

.

[PeteLeathersac]

‘

:beers:
~ Pete

.

[PeteLeathersac]

‘

A few more pics of Doug Thorley and his Chevy-2 Much.
:3gears:
~ Pete

.

[chevyman0429]

https://www.facebook.com/share/eZqZ1ogZmLqyqSYD/?mibextid=79PoIi

[dykstra]

I can’t stop laughing!

[Derek69SS]

I picked up a set of NOS Doug Thorley headers recently that are orange.

[John Brown]

I picked up a set of NOS Doug Thorley headers recently that are orange.

Had Dougs Hedders on my small block drag car 67 Caprice in 73. They were orange.

Same color mine were, same decals too.

[Hawkeye]

I picked up a set of NOS Doug Thorley headers recently that are orange.

Do you know what application they fit?

[John Brown]

Do you know what application they fit?

As I recall, part numbers were stamped on the outer side of the flange that were visible when bolted to the head.

[Derek69SS]

Do you know what application they fit?
I do not. They look like they might fit a Chevelle, but the #8 pipe will hang below the frame right behind the front wheel if that's what it fits. I haven't test fit them in my Chevelle yet.

If they don't fit that, I'm thinking C2/C3 Corvette is most likely.

As I recall, part numbers were stamped on the outer side of the flange that were visible when bolted to the head.
There were no stamps or anything anywhere. There's an ink stamp that looks like an inspector's mark, but no numbers that coincide with a part number.

[Derek69SS]

I got a chance to try a test-fit on my '68 SS396, and they definitely do NOT fit a Chevelle.
#4 pipe interferes with the crossmember, so they can't go forward enough to line up with the heads. It's about an inch off, so not within hammering in some tolerance.

[1967Z28]

I think Doug Thorley (Doug's) headers from the late '60s and very early '70s were kind of a salmon orange color as seen in these vintage NOS hemi and AMC headers. It's not the same kind of orange like Chevy orange block paint.

[Lynn]

A little off topic, but I have always been unclear if all three of these entities are the same "Doug"

Headers by Doug
Doug's Headers
Doug Thorley Headers

Anyone know for certain?

[1967Z28]

Yes, they are all the same entity.

[ban617]

Some very cool ad’s ..Has anyone ran the Super Muff QT mufflers ? They appear to look like turbo mufflers…

[olredalert]

A little off topic, but I have always been unclear if all three of these entities are the same "Doug"

Headers by Doug
Doug's Headers
Doug Thorley Headers

Anyone know for certain?

----Met Doug way back in 1992 in Bakersfield at the Hot Rod Runion. I was crewing for Bob Riggle and we all went out for dinner one night. I wondered about just what you are talking about. There was a divorce involved and I believe his wife ended up with the 1st Dougs Headers. Doug went and started over with Doug Thorley headers. I'm not sure where Headers by Doug fits in....Bill S

[jer]

IIRC, she ended up with the Doug's Headers after the divorce while Doug started the new "Headers by Doug". The latter was the better quality, the former turned to junk.

[olredalert]

IIRC, she ended up with the Doug's Headers after the divorce while Doug started the new "Headers by Doug". The latter was the better quality, the former turned to junk.

----The junk part makes sense....Bill S

[scuncio]

Doug’s company became “Doug’s Headers”, while the wife’s company remained “Doug Thorley.”

[olredalert]

Doug’s company became “Doug’s Headers”, while the wife’s company remained “Doug Thorley.”

----Had it backward. Probably too many beers that night at dinner!,,,Oops!....Bill S