Fuel pump restoration vendor

[ronzz572]

Ok who's reliable for fuel pump restoration. I have 2 40727s and 1 40470 I want to get done.

[X66 714]

He's the only one I trust. He a little back logged at the moment. Any chance I could trouble you for the date codes on all your pumps? Thank you, Joe

Fred Ballard
28916 Flowerpark Drive
Canyon Country, Ca. 91387-1801
661-251-2362
[email protected]

[TimG]

Fred does good work, I've had him rebuild my original pumps.

[ronzz572]

The 40470 has a CG40470 both the 40727s are both service dates. 208Z40727 and 076T40727

[X66 714]

The 40470 has a CG40470 both the 40727s are both service dates. 208Z40727 and 076T40727

Thank you, Joe

[dl7265]

Fred does good work, I've had him rebuild my original pumps.

Of all the referrals and reaching out directly, I've never seen an actual photo of his " restoration" . Would you have any? prior to the $305.00 pre-paid check being sent out. Thanks,

[RPOLS3]

I had Fred do mine back in Spring of 2021 and no issues since.

[Jonesy]

https://www.yenko.net/forum/showthread.php?t=172643&highlight=ballard

Click that link for more pics. There are other posts with pics also if you search

[CamarosRus]

GOAT HILL screwed me on two AC Delco 1970 pumps, plating both bottoms with Clear (Silver) Zinc................and NOT the Correct Yellow Zinc .........Now I dont know what to do ?????

[TimG]

Fred has done four pumps for me, all for Survivor cars, so no plating or cleaning. He makes one small incision on the inboard side of the top housing and peels it back for internal service. When mounted, this cut is not detectable. His word is good.

[napa68]

Another Fred fan here!

[X66 714]

GOAT HILL screwed me on two AC Delco 1970 pumps, plating both bottoms with Clear (Silver) Zinc................and NOT the Correct Yellow Zinc .........Now I dont know what to do ?????


Goathill kept my money. Never got a pump. When I talk to him previously he says he doesn't have a core to build but he had no problem cashing my check. I had to write it off as a bad experiance. You're lucky you even got one even being restored wrong. Somebody else is needing to step up to the plate. Fred isn't a spring chicken. Wonderful work....Joe

[TimG]

Here is a Survivor rebuild of my fuel pump from a 1300 mile 1971 LT1 Corvette.

[Jonesy]

GOAT HILL screwed me on two AC Delco 1970 pumps, plating both bottoms with Clear (Silver) Zinc................and NOT the Correct Yellow Zinc .........Now I dont know what to do ?????

Good luck! At least you got them back. He cashed my check and never sent the pump he promised me. All he has is excuses! I would never recommend Goat Hill Classics. Never had a vendor ever rip me off except that piece of work.