'71 #s LT-1 Corvette, 47k Miles, Stored since '78

[scuncio]

Nice looking car, been stored away for as long as I've been alive.

Those tires nearly prove that this car hasn't moved much in the past 44 years....

Link to 1971 LT-1 Corvette eBay auction (https://www.ebay.com/itm/256021524054?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5337538513&customid=&toolid=10001&mkevt=1)

https://i.ebayimg.com/00/s/OTYwWDE0NDA=/z/5F0AAOSwKDtkEKlP/$_57.JPG?set_id=2

https://i.ebayimg.com/00/s/OTYwWDE0NDA=/z/jaEAAOSwIYJkEKlQ/$_57.JPG?set_id=2

https://i.ebayimg.com/00/s/OTYwWDE0NDA=/z/AyUAAOSwnaNkEKlS/$_57.JPG?set_id=2

https://i.ebayimg.com/00/s/OTYwWDE0NDA=/z/ppcAAOSwdwRkEKlZ/$_57.JPG?set_id=2

https://i.ebayimg.com/00/s/OTYwWDE0NDA=/z/16kAAOSwNyVkEKlj/$_57.JPG?set_id=2

194371S111990

[TimG]

It has a nice tank sticker, I wonder why they didn't post a picture of it.

[scuncio]

Relisted in the link below, for $69,950 or best:

Link to 1971 LT-1 Corvette eBay auction (https://www.ebay.com/itm/256081990837?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5337538513&customid=&toolid=10001&mkevt=1)

[olredalert]

----Incorrect radiator! I believe there are correct looking repops available. Not cheap, but worth changing out. I do like the deluxe interior. Just a tad heavy on the pricing, IMHO....Bill S

[Crush]

Man I like it! What’s a fair price?

[napa68]

Man I like it! What’s a fair price?

The car would need an in person inspection. The fit of the hood is terrible. I'm thinking it's been hit. There are a bunch of items that can get spendy on these cars to make them right. I see it's missing the TI coil, so one could assume the distributor is not right. I also see there is no wire going to the right side cylinder head for the TCC system. The carb for these cars are trading in the neigborhood of 1100-1500 alone, to say nothing for the other associated smalls. You need to put rubber on it (obviously).

Having said all of that, high 40's IMHO

[Too Many Projects]

Listing has ended...

[olredalert]

The car would need an in person inspection. The fit of the hood is terrible. I'm thinking it's been hit. There are a bunch of items that can get spendy on these cars to make them right. I see it's missing the TI coil, so one could assume the distributor is not right. I also see there is no wire going to the right side cylinder head for the TCC system. The carb for these cars are trading in the neigborhood of 1100-1500 alone, to say nothing for the other associated smalls. You need to put rubber on it (obviously).

Having said all of that, high 40's IMHO

----I agree! That's what my "a tad" was leaning to.....Bill S

[Crush]

The car would need an in person inspection. The fit of the hood is terrible. I'm thinking it's been hit. There are a bunch of items that can get spendy on these cars to make them right. I see it's missing the TI coil, so one could assume the distributor is not right. I also see there is no wire going to the right side cylinder head for the TCC system. The carb for these cars are trading in the neigborhood of 1100-1500 alone, to say nothing for the other associated smalls. You need to put rubber on it (obviously).

Having said all of that, high 40's IMHO

You are the man! Thanks for taking the time to explain that

[scuncio]

This one has been relisted - for $59,950 in the link below.

That hood does fit pretty badly - it's even easier to see in a front view.

Link to 1971 LT-1 Corvette eBay auction (https://www.ebay.com/itm/256112589993?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5337538513&customid=&toolid=10001&mkevt=1)

https://i.ebayimg.com/images/g/ai8AAOSw2n9kEKlU/s-l1600.jpg

*Note: When you click on this link and make a purchase, I may earn a small commission from eBay. These commissions help to provide financial support for the sYc site.

[Too Many Projects]

I think the surround panel has been worked on between the hood and headlight doors for the common rust issue and not very well. It appears wavy and low on the right side, possibly causing the gaps there. The right HL door appears to be in good alignment with the rest of the panel around it and there is a bubble on the left, presumably from rust still under it. The rest of the gaps look decent..:dunno:

[juliosz]

I think the surround panel has been worked on between the hood and headlight doors for the common rust issue and not very well. It appears wavy and low on the right side, possibly causing the gaps there. The right HL door appears to be in good alignment with the rest of the panel around it and there is a bubble on the left, presumably from rust still under it. The rest of the gaps look decent..:dunno:

Agree!!