View Full Version : Used shock absorber sprayed with undercoating
RALLY
05-17-2023, 11:55 PM
I have a used set of shock absorbers that have some undercoating on them. What do you use to loosen this undercoating to remove?
napa68
05-17-2023, 11:58 PM
I have a used set of shock absorbers that have some undercoating on them. What do you use to loosen this undercoating to remove?
Go jo hand cleaner
ban617
05-18-2023, 01:40 AM
Depending on how much perhaps a wire wheel.. I have used a wire brush & propane torch to remove under coat from the bottom of the body before …
Lacquer thinner or acetone.
If you are trying to get the undercoating off WITHOUT damaging the underlying paint, them make sure the paint isn't lacquer based. Test on a small inconspicuous area.
"Goof Off" is another option, but will require more effort.
Mr.Nickey Nova
05-19-2023, 04:03 PM
Dan you can also use Mineral Spirits, always worked for me.
RALLY
05-19-2023, 04:04 PM
Dan you can also use Mineral Spirits, always worked for me.
Thanks Mark, very good info.
desertedboat
07-11-2023, 04:57 AM
Perhaps a wire wheel, but it depends on the budget. Try it out in a hidden spot.
BCreekDave
07-11-2023, 02:23 PM
Copious amounts of Goof Off is pretty gentle, but time consuming. It won't touch the paint if that is your goal.
scuncio
07-11-2023, 04:45 PM
3M Adhesive Remover is some of the best stuff on earth for a job like this.
Donnie
07-11-2023, 07:31 PM
Diesel fuel
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.