jeremy clark
11-30-2023, 09:52 PM
The two front hoses came off of a 29,XXX mile wrecked COPO I recently restored. There is a small split up toward where the brake line connects. On one hose it goes about halfway around the diameter of the hose and on the other hose it has barely started. One hose has A04029 printed on it, the other has what appears to be A16019 printed on it. The red printing and striping isn't perfect but very legible for the most part
The rear hose came off of a 12 bolt rear end I recently purchased from a hoard and has no cracks or splits it has A03019 printed on it.
I can blow air through all 3 hoses, I have not used any abrasives or blasting to clean them -just towels. I'm sure they'll clean up a little better
$360 shipped to the lower 48
The rear hose came off of a 12 bolt rear end I recently purchased from a hoard and has no cracks or splits it has A03019 printed on it.
I can blow air through all 3 hoses, I have not used any abrasives or blasting to clean them -just towels. I'm sure they'll clean up a little better
$360 shipped to the lower 48